Determination of stress intensity factors due to thermal stresses using isochromatic fringe patters
Carregando...
Data
Data de publicação:
2005
Autores IPEN
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
É parte de
INTERNATIONAL CONGRESS OF MECHANICAL ENGINEERING, 18th
Exportar
Resumo
Transmission photoelasticity was used to obtain an experimental solution for stress intensity factors, KI, due
to thermal loads in photoelastic models. In a photoelastic plate, a slot to simulate a crack was introduced. Also, a tube
to circulate a coolant was fixed in one of the edges of the plate. The photoelastic model was putted on a photoelastic
oven and kept at 60 °C. Then, methyl alcohol at -15 °C circulated through the cooling tube. The thermal shock in the
plate caused stress on it and, as a consequence, transient photoelastic fringe patterns appeared and were captured by
an image acquisition system.
For each captured photoelastic fringe pattern, the stress intensity factor KI was determined using a dedicated software,
specially developed to do it, based on the Dally overdeterministic method. This results are compared with numerical
analyses.
Based on the obtained results, some conclusions and recommendations on the experimental techniques used were
addressed.
The paper present a alternative experimental methodology for evaluation of stress intensity factors due thermal loads.
The construction of the models can be very simple, the used equipments can be of easy acquisition or manufacture. In
this aspect, it should be noticed that in spite of the polariscope used in this work is quite sophisticated, it is necessary a
rudimentary polariscope to conduct these type of experiments, just constituted of a light source and plane polarizers
plates easily found.
Como referenciar
QUINAN, M.A.; MATTAR NETO, M. Determination of stress intensity factors due to thermal stresses using isochromatic fringe patters. In: INTERNATIONAL CONGRESS OF MECHANICAL ENGINEERING, 18th, Nov. 6-11, 2005, Ouro Preto, MG. Proceedings... Disponível em: http://repositorio.ipen.br/handle/123456789/18334. Acesso em: 19 Apr 2024.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.