An experimental study of the solidification thermal parameters influence upon microstructure and mechanical properties of Al-Si-Cu alloys
Carregando...
Data
2018
Data de publicação:
Autores IPEN
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
Materials Research
Exportar
Resumo
Metals solidification involves the transformation of the molten metal back into the solid state.
Solidification structures impact heavily on the final product's characteristics. The microstructure effects
on metallic alloys properties have been highlighted in various studies and particularly the dendrite
arm spacing influence upon the mechanical properties such as tensile strength has been reported. In
the present investigation, Al-10wt%Si-2wt%Cu and Al-10wt%Si-5wt%Cu alloys were directionally
solidified upward under transient heat flow conditions. The experimental results include solidification
thermal parameters such as tip growth rate and cooling rate, optical microscopy, volume fraction of the
eutectic mixture, primary dendritic arm spacing and ultimate tensile strength. Experimental growth laws
of primary dendrite arm spacing as a function of the solidification thermal parameters are proposed.
The Hall-Petch mathematical expressions were used to correlate the ultimate tensile strength as a
function of the primary dendritic arm spacing. It was found that the alloy with higher copper content
had a more refined structure. More refined structures had higher ultimate tensile strength values.
Como referenciar
NASCIMENTO, MAURICIO S.; FRANCO, ANTONIO T.R.; FRAJUCA, CARLOS; NAKAMOTO, FRANCISCO Y.; SANTOS, GIVANILDO A. dos; COUTO, ANTONIO A. An experimental study of the solidification thermal parameters influence upon microstructure and mechanical properties of Al-Si-Cu alloys. Materials Research, v. 21, n. 5, 2018. DOI: 10.1590/1980-5373-MR-2017-0864. Disponível em: http://repositorio.ipen.br/handle/123456789/29330. Acesso em: 24 Apr 2024.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.