Monte Carlo modeling of the new plate-type core for the Brazilian IPEN/MB-01 research reactor
Carregando...
Data
Data de publicação:
2019
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
É parte de
INTERNATIONAL NUCLEAR ATLANTIC CONFERENCE
Exportar
Resumo
After 30 years of operation, the IPEN/MB-01 research reactor is about to receive a new plate-type core. This replacement is due to the Brazilian Multipurpose Reactor (RMB) needs, the largest project in nuclear engineering taking place in Brazil. The RMB will be a 30MW open pool-type research reactor, keeping the core in a 5x5 configuration (23 fuel elements, made of U3Si2-Al fuel plates, with 3.7 gU/cm3, 19.75% enriched in U-235 and two extra positions available for materials irradiation). The radioisotopes production, material irradiation, nuclear fuels structural testing and the development of scientific and technological research using neutron beams are the main targets of the RMB enterprise. In this way, in order to verify, experimentally, the calculation methods and data libraries used for the Brazilian Multipurpose Reactor design, reactor cell and mesh structures, control rods effectiveness, isothermal reactivity coefficients and core dynamics due to reactivity insertions, the IPEN/MB-01 new plate-type core is being implemented at the Nuclear and Energy Research Institute (IPEN/CNEN-SP), SP-Brazil. It´s a tank-type research reactor. The core has a 4×5 configuration, with 19 fuel elements (U3Si2-Al, 2.8gU/cm³ and 19.75% enriched in U-235), plus one aluminum block (internal irradiation position). As burnable poison, cadmium wires were used, once they are also employed at the RMB project to control the power density and the excess of reactivity during its operation. The core is reflected by four boxes of heavy water (D2O) and its maximum nominal power is 100W. Thereby, a Monte Carlo modeling was developed using the Monte Carlo N-Particle code (MCNP), along with NJOY, for processing the materials nuclear cross sections. This modeling for the IPEN/MB-01 new plate-type core is presented and some neutronic calculations were also depicted in this paper.
Como referenciar
JOÃO, THIAGO G.; SANTOS, DIOGO F. dos; ROSSI, PEDRO C.R.; SOUZA, GREGORIO S. de; SANTOS, ADIMIR dos. Monte Carlo modeling of the new plate-type core for the Brazilian IPEN/MB-01 research reactor. In: INTERNATIONAL NUCLEAR ATLANTIC CONFERENCE, October 21-25, 2019, Santos, SP. Proceedings... Rio de Janeiro: Associação Brasileira de Energia Nuclear, 2019. p. 4131-4143. Disponível em: http://repositorio.ipen.br/handle/123456789/30691. Acesso em: 18 Apr 2024.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.