Ultrahigh temperature in situ transmission electron microscopy based bicrystal coble creep in Zirconia II

Carregando...
Imagem de Miniatura
Data
2020
Data de publicação:
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
Acta Materialia
Exportar
Mendeley
Projetos de Pesquisa
Unidades Organizacionais
Fascículo
Resumo
This work uses a combination of stress dependent single grain boundary Coble creep and zero-creep ex- periments to measure interfacial energies, along with grain boundary point defect formation and migra- tion volumes in cubic ZrO 2 . These data, along with interfacial diffusivities measured in a companion paper are then applied to analyzing two-particle sintering. The analysis presented indicates that the large acti- vation volume, v ∗= v f + v m primarily derives from a large migration volume and suggests that the grain boundary rate limiting defects are delocalized, possibly due to electrostatic interactions between charge compensating defects. The discrete nature of the sintering and creep process observed in the small-scale experiments supports the hypothesis that grain boundary dislocations serve as sources and sinks for grain boundary point defects and facilitate strain during sintering and Coble creep. Model two-particle sintering experiments demonstrate that initial-stage densification follows interface reaction rate-limited kinetics.

Como referenciar
GROSSO, ROBSON L.; VIKRANT, K.S.N.; FENG, LIN; MUCCILLO, ELIANA N.S.; MUCHE, DERECK N.F.; JAWAHARRAM, GOWTHAM S.; BARR, CHRISTOPHER M.; MONTERROSA, ANTHONY M.; CASTRO, RICARDO H.R.; EDWIN GARCIA, R.; HATTAR, KHALID; DILLON, SHEN J. Ultrahigh temperature in situ transmission electron microscopy based bicrystal coble creep in Zirconia II: interfacial thermodynamics and transport mechanisms. Acta Materialia, v. 200, p. 1008-1021, 2020. DOI: 10.1016/j.actamat.2020.08.070. Disponível em: http://200.136.52.105/handle/123456789/31586. Acesso em: 29 Mar 2024.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.

Agência de fomento
Coleções