Microstructural characteristics of the Al alloys
Carregando...
Data
2020
Data de publicação:
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
Metallography, Microstructure, and Analysis
Exportar
Resumo
Microstructure characteristics of two high-strength aluminum alloys, the 2024-T3 Al–Cu–Mg, and the new generation Al–Cu–Li alloy 2198, in the T8 and T851 tempers, were investigated in this study. For this purpose, microstructural and statistical analyses were carried out. The results showed equiaxed grains for the 2024-T3 and 2198-T851 alloys, whereas, elongated grains for the 2198-T8. Besides, the 2198-T851 alloy displayed slip bands in the grains due to the stretching stage, “51”. The 2024-T3 alloy showed at least two types of constituent particles, Al–Cu–Mg and Al–Cu–Mn–Fe–(Si); whereas Al–Cu–Li alloys showed only one type, Al–Cu–Fe, in their composition. Statistical analyses showed that the percentage of area covered by constituent particles was larger in the 2024-T3 alloy compared to the 2198 in both tempers, T8 and T851. On the other hand, the Al–Cu–Li alloys showed higher microhardness values relatively to the Al–Cu one. The differences among the nanometric phases present in Al–Cu and Al–Cu–Li alloys were analyzed by transmission electron microscopy. All the results were related to the different chemical composition and industrial thermomechanical processing of each alloy.
Como referenciar
ARAUJO, JOAO V. de S.; MILAGRE, MARIANA X.; FERREIRA, RAPHAEL O.; MACHADO, CARULINE de S.C.; ABREU, CAIO P. de; COSTA, ISOLDA. Microstructural characteristics of the Al alloys: the dissimilarities among the 2XXX alloys series used in aircraft structures. Metallography, Microstructure, and Analysis, v. 9, n. 5, p. 744-758, 2020. DOI: 10.1007/s13632-020-00688-5. Disponível em: http://200.136.52.105/handle/123456789/31646. Acesso em: 24 Apr 2024.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.