Parametric study for enhancing the radioisotope production in the IEA-R1 research reactor
Carregando...
Data
2021
Data de publicação:
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
Brazilian Journal of Radiation Sciences
Exportar
Resumo
In this work a parametric study was carried to increase the production of radioisotopes in the IEA-R1 research reactor. The changes proposed to implement in the IEA-R1 reactor core were the substitution of graphite reflectors by beryllium reflectors, the removal of 4 fuel elements to reduce the core size and make available 4 additional locations to be occupied by radioisotope irradiation devices. The key variable analyzed is the thermal neutron flux in the irradiation devices. The proposed configuration with 20 fuel elements in an approximately cylindrical geometry provided higher average neutron flux (average increment of 12.9 %) allowing higher radioisotope production capability. In addition, it provided 4 more positions to install irradiation devices which allow a larger number of simultaneous irradiations practically doubling the capacity of radioisotope production in the IEA-R1 reactor. The insertion of Be reflector elements in the core has to be studied carefully since it tends to promote strong neutron flux redistribution in the core. A verification of design and safety parameters of the proposed core was carried out. The annual fuel consumption will increase about 17 % and more storage space for spent fuel will be required.
Como referenciar
STEFANI, GIOVANNI L. de; GENEZINI, FREDERICO A.; SANTOS, THIAGO A. dos; MOREIRA, JOAO M. de L. Parametric study for enhancing the radioisotope production in the IEA-R1 research reactor. Brazilian Journal of Radiation Sciences, v. 9, n. 2B, p. 1-20, 2021. DOI: 10.15392/bjrs.v9i2B.1516. Disponível em: http://repositorio.ipen.br/handle/123456789/32160. Acesso em: 23 Apr 2024.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.