Development of anode-supported solid oxide fuel cell by co-tape casting and co-sintering
Carregando...
Data
2021
Data de publicação:
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
ECS Transactions
ODS
Exportar
Resumo
Simple and cost-effective technologies to produce solid oxide fuel cells require control of microstructure, thickness, homogeneity, and reproducibility of the functional layers. The manufacturing of a solid oxide fuel cell (SOFC) involves significant ceramic processing challenges to obtain layers with controlled microstructure. Possibly the most common technique for large-scale production of SOFCs is tape casting. In this study, YSZ electrolyte and 60NiO/YSZ anode slurries were studied for the production of half-cells deposited by the sequential tape casting technique. A co-sintering procedure was developed for the half-cells and after cathode deposition the single cells were tested.
Como referenciar
RODRIGUES, L.N.; MACHADO, MARINA; MORAES, L.P.R.; THYSSEN, V.V.; FONSECA, F.C. Development of anode-supported solid oxide fuel cell by co-tape casting and co-sintering. ECS Transactions, v. 103, n. 1, p. 2245-2251, 2021. DOI: 10.1149/10301.2245ecst. Disponível em: http://repositorio.ipen.br/handle/123456789/32803. Acesso em: 18 Apr 2024.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.