Wear of SLM AISI 316L stainless steel for biomaterials application

Carregando...
Imagem de Miniatura
Data
Data de publicação:
2022
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
É parte de
BRAZIL MRS MEETING, 20th
Exportar
Mendeley
Projetos de Pesquisa
Unidades Organizacionais
Fascículo
Resumo
The laser techniques usage on the biomaterial’s field includes welding, engraving, cutting and texturing. The present study evaluated the influence of laser texturing process on the tribological behavior of AISI 316L austenitic stainless steel (SS) on the friction coefficient and wear volume in ball-cratering wear tests. The laser texturing process was carried out with a nanosecond optical fiber ytterbium laser at four different pulse frequencies. Advanced selective laser melting (SLM) techniques allow the production of pieces with the most varied sizes, shapes and complex geometries. For comparison reasons, pristine surfaces were also evaluated. The sample’s surfaces finishing was analyzed by laser confocal microscopy. The wear tests were carried out during 10 min, solid spheres of 52-100 chrome steel, with 2 mm in diameter, were used as counter-bodies. The results indicated that the tribological behavior is influenced by the laser additive manufacturing (AM) process parameters used for this biomaterial, and the wear rate is dependent of the normal force and the roughness of each specimen.

Como referenciar
PIERETTI, EURICO F.; BONANI, EDUARDO G.; ANTUNES, RENATO A.; NEVES, MAURICIO M. das. Wear of SLM AISI 316L stainless steel for biomaterials application. In: BRAZIL MRS MEETING, 20th, September 25-29, 2022, Foz do Iguaçu, PR. Abstract... São Carlos, SP: Aptor Software, 2022. Disponível em: http://repositorio.ipen.br/handle/123456789/33568. Acesso em: 28 Mar 2024.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.

Agência de fomento