OLANDIR VERCINO CORREA
4 resultados
Resultados de Busca
Agora exibindo 1 - 4 de 4
Artigo IPEN-doc 30376 VIS-active TiO2 films decorated by expanded graphite2024 - BENTO, RODRIGO T.; CORREA, OLANDIR V.; GASTELOIS, PEDRO L.; PILLIS, MARINA F.TiO2/C nanocomposite films were applied on water treatment. Expanded graphite nanosheets (EG) were obtained by UVC-assisted liquid-phase exfoliation technique, without the addition of acids, surfactants, or aggressive oxidizing agents, which characterizes the process as an eco-friendly method. The carbon nanosheets were synthesized directly from graphite bulk at different times and deposited on TiO2 films surface by airbrush spray coating method, forming a TiO2/C heterojunction. The increase in the exfoliation time promoted a more efficient photocatalytic dye removal under visible light. Morphological modifications, changes in the electronic structure, and wide range of light absorption were observed from the TiO2/C heterojunction formation. The results showed that hybrid TiO2/C supported photocatalyst is a promise alternative for practical photocatalytic applications under sunlight.Artigo IPEN-doc 27162 Effect of growth parameters on the photocatalytic performance of TiO2 films prepared by MOCVD2020 - MARCELLO, BIANCA A.; CORREA, OLANDIR V.; BENTO, RODRIGO T.; PILLIS, MARINA F.The present study evaluated the main factors that influence the photocatalytic activity of titanium dioxide (TiO2) films grown by metalorganic chemical vapor deposition (MOCVD) at 400 and 500 °C, in different growth times. The photocatalytic behavior was analyzed by measuring the methyl orange dye degradation at different pH values. Structural and morphological characteristics, and the recyclability of the catalysts for several cycles were also investigated. Anatase phase was identified in all films. The higher photodegradation performances were obtained at acidic pH. The results demonstrated that the photocatalyst thickness is an important parameter in heterogenous photocatalysis. The best photocatalytic result occurred for the 395 nm-thick TiO2 film grown at 400 °C, which presented 65.3% of the dye degradation under UV light. The recyclability experiments demonstrated that the TiO2 films grown by MOCVD present a great stability after several photocatalytic cycles, which allows their practical application for water treatment with high efficiency.Artigo IPEN-doc 26509 Structural, adhesion and electrochemical characterization of electroless plated Ni-P-carbon black composite films on API 5L X80 steel2019 - OLIVEIRA, MARA C.L. de; CORREA, OLANDIR V.; SILVA, REJANE M.P. da; LIMA, NELSON B. de; OLIVEIRA, JEFFERSON T.D. de; OLIVEIRA, LEANDRO A. de; ANTUNES, RENATO A.In this work, composite Ni-P-carbon black coatings were obtained by electroless deposition on API 5L X80 substrates. The effect of carbon black on structural, adhesion and electrochemical properties of the plated samples was evaluated. Scanning electron microscopy analyses were carried out to examine the top surface and cross section of the films. Scratch tests were employed to evaluate coating adhesion properties. Potentiodynamic polarization tests were carried out to investigate the global electrochemical behavior of the deposited layers. Scanning electrochemical microscopy (SECM) was employed to measure local electrochemical activity over the coated surfaces. The carbon black concentration markedly affects the morphology, adhesion and electrochemical properties of the Ni-P-carbon black layers. The results point to an optimum carbon black content to achieve the best performance against corrosion. The coatings obtained at a carbon black concentration of 0.25 g L21 provided the best protection ability. The results are discussed with respect to coating morphology, adhesion and electrochemical activity.Artigo IPEN-doc 20836 Effect of laser parameters on the corrosion resistance of the ASTM F139 stainless steel2015 - PIERETTI, EURICO F.; PESSINE, ELISABETE J.; CORREA, OLANDIR V.; ROSSI, WAGNER de; NEVES, MAURICIO D.M. das