OLANDIR VERCINO CORREA

Projetos de Pesquisa
Unidades Organizacionais
Cargo

Resultados de Busca

Agora exibindo 1 - 7 de 7
  • Artigo IPEN-doc 26760
    Revestimentos de TiO2 para preservação de superfícies cimentícias
    2019 - BORAZANIAN, T.C.F.; SZURKALO, M.; CORREA, O.V.; BENTO, R.T.; SANTOS, T.F.; COTINHO, S.P.; PILLIS, M.F.
    Este trabalho tem como objetivo avaliar o desempenho autolimpante de filmes fotocatalíticos de TiO2 aplicados sobre argamassa cimentícia usada como revestimento externo de vedações verticais das edificações. Os filmes foram sintetizados pelo método sol-gel e depositados por spray coating, à temperatura ambiente, sobre substratos de argamassa cimentícia. Foram testadas amostras com uma e duas camadas de deposição de filme e foram realizados testes de autolimpeza. As análises apontam que as amostras com aplicação de duas camadas de filme de TiO2 exibem degradação mais eficiente do corante azul de metileno, após 3 ciclos de 48 horas sob radiação UV, o que sugere sua aplicação promissora para preservação e manutenção de superfícies de revestimentos externos utilizados na construção civil.
  • Artigo IPEN-doc 26548
    Revestimentos de TiO2 para a preservação de superfícies arquitetônicas
    2019 - BORAZANIAN, TATYANA C.F.; SZURKALO, MARGARIDA; CORREA, OLANDIR V.; BENTO, RODRIGO T.; PILLIS, MARINA F.
    A utilização do dióxido de titânio (TiO2) tem sido amplamente estudada para proteção de elementos arquitetônicos e de revestimentos externos utilizados na construção civil, a fim de preservar melhor seu aspecto visual e minimizar a necessidade constante de limpeza e manutenção decorridas da deposição de partículas de poluentes existentes na atmosfera. Este trabalho tem como objetivo avaliar o desempenho autolimpante de filmes fotocatalíticos de TiO2 aplicados em superfícies de materiais comumente empregados na Arquitetura.
  • Resumo IPEN-doc 25476
    UV–Vis photocatalytic performance of the S-doped TiO2 and TiO2 thin films for water treatment
    2018 - BENTO, R.T.; SZURKALO, M.; OLIVEIRA, E.C.; CORREA, O.V.; PILLIS, M.F.
    TiO2 films have been widely used as catalysts in oxidative processes in order to degrade organic contaminant. However, without the presence of a dopant material, its photocatalytic activity is limited only in the region of ultraviolet radiation (UV), due to its high-energy band gap. In this present research, anatase TiO2 thin films were grown on borosilicate substrates by metalorganic chemical vapor deposition (MOCVD) at 400ºC. To make the semiconductor active in the visible light region, sulfur doped TiO2 films were prepared by means of a thermochemical treatment carried out in a tubular oven, under atmosphere of H2S at 50ºC for 60 minutes. The films were characterized by XRD, AFM, FE-SEM and XPS technique. The photocatalytic behavior of the films was evaluated by methyl orange dye degradation under UV-Vis irradiation for 300 minutes. The photocatalytic tests were realized in a reactor illuminated by two tubular UV lamps (352 nm), and in a reactor illuminated by visible light (400-700 nm) on different intensities, both containing 40 mL of the dye solution. The results showed that the S-TiO2 films present promising photocatalytic efficiency. Without the presence of the catalyst, there was no degradation of the methyl orange dye under UV-Vis irradiation. Non-doped TiO2 films do not exhibited photocatalytic activity under visible light. It was possible to observe that the visible light intensity influences the doped films photocatalytic performance.
  • Artigo IPEN-doc 25006
    Characterization and photocatalytic behavior of TiO2 thin films grown by MOCVD process
    2017 - BENTO, RODRIGO T.; OLIVEIRA, EDUARDO C. de; SZURKALO, MARGARIDA; CORREA, OLANDIR V.; PILLIS, MARINA F.
    This research aims to evaluate the influence of the thickness on the photocatalytic behavior of TiO2 thin films grown at 400ºC by metalorganic chemical vapor deposition. Titanium dioxide films with 280 and 468 nm of thickness were grown on borosilicate substrates. The photocatalytic behavior was evaluated by monitoring the degradation of methyl orange dye under UV light for 2h. The results show that both films presented anatase crystalline phase and that increasing the thickness the grain size and the roughness were also increased. The best photocatalytic performance was attributed to the film of 468 nm of thickness that exhibited 40% of dye degradation after 2h under UV light.
  • Artigo IPEN-doc 25005
    Synthesis and characterization of TiO2 films obtained by sol-gel method
    2017 - SZURKALO, MARGARIDA; OLIVEIRA, EDUARDO C. de; CORREA, OLANDIR V.; BENTO, RODRIGO T.; PILLIS, MARINA F.
    Borosilicate coated titanium dioxide thin films were produced by the sol-gel method. The films were calcinated at 450°C for 20 minutes for crystalization. X-ray diffration analyses show that before the heat treatment the film was amorphous and after that it crystallized in anatase phase presenting mean grain size of 34 nm and RMS roughness of 8 nm. The crystallized film was used as photocatalist in the degradation of methyl orange dye presenting an efficiency of 25% after 2h under UV light.
  • Artigo IPEN-doc 24951
    Morphological characterization of N-doped TiO2 thin films
    2017 - OLIVEIRA, EDUARDO C. de; SZURKALO, MARGARIDA; CORREA, OLANDIR V.; BENTO, RODRIGO T.; PILLIS, MARINA F.
    Metallorganic chemical vapor deposition was used to grown TiO2 and N-doped TiO2 on borosilicate substrates at 400°C. Titanium isopropoxide IV was used as titanium and oxygen precursors and ammonia as nitrogen source. Analyses by atomic force microscopy showed that both films presented rounded well-defined grains. The results showed that nitrogen doping resulted in a decrease in the mean grain size and in the surface roughness.
  • Resumo IPEN-doc 24931
    Morphological characterization of S-doped TiO2 thin films
    2017 - BENTO, RODRIGO T.; SZURKALO, MARGARIDA; CORREA, OLANDIR V.; PILLIS, MARINA F.