NIKLAUS URSUS WETTER

Resumo

Niklaus Ursus Wetter holds a BA in Physics from the Eidgenössische Technische Hochschule Zürich - ETH (1988 - Switzerland) and a Ph.D. in Nuclear Technology from the Institute for Energy and Nuclear Research (1993). He is currently a senior researcher at the National Nuclear Energy Commission at IPEN / SP and a postgraduate professor at the University of São Paulo ? USP, where he regularly teaches a subject. From 2009 to 2013 he was deputy manager of the Center for Lasers and Applications at IPEN / SP. From 2013 to 2018 he held the position of manager of the Center for Lasers and Applications at IPEN / SP. From 2014 to 2020 he held the position of CEO of FAFITPE, IPEN's Foundation for Support and Promotion of Technological Innovation in Research and Education. Since 2019 he has held the position of Deputy Director of Research and Internationalization Manager at IPEN. As manager of Internationalization, he has so far implemented 14 bilateral agreements with universities and institutes around the world, including the Battelle Energy Alliance, which encompasses eight of the largest federal research institutions in the US. In 2018 he was responsible for organizing the André Swieca Summer School and the São Paulo School of Advanced Science FAPESP "Laserfrontiers.com" with 141 students, 40 of whom came from outside Latin America. He specializes in laser development and operates in the main segments: Diode lasers, waveguides, solid state lasers, laser applications in life sciences, lasers in nuclear applications, optical spectroscopy and materials for laser media in general. Since 2008 he has been developing light sources in disordered materials, or "Random Lasers", for the purpose of applications in optical devices. In 2017, he acquired, through a FAPESP project, a Raman-TERS (AFM) multiuser equipment with STM and SNOM, focused on measurements and development of nanomaterials. He has 4 patent letters and 7 applications in total, 190 international articles with over 2000 citations and an h factor of 26 (Scopus). (Text obtained from the Currículo Lattes on October 14th 2021)


Niklaus Ursus Wetter é bacharel em Física pela Eidgenössische Technische Hochschule Zürich - ETH (1988 - Suíça) e Doutor em Tecnologia Nuclear pelo Instituto de Pesquisas Energéticas e Nucleares (1993). Atualmente é pesquisador titular da Comissão Nacional de Energia Nuclear no IPEN/SP-USP e docente de pós-graduação da Universidade de São Paulo ? USP, onde ministra regularmente uma disciplina. De 2009 a 2013 foi gerente adjunto do Centro de Lasers e Aplicações do IPEN/SP. De 2013 até 2018 ocupou o cargo de gerente do Centro de Lasers e Aplicações do IPEN/SP. De 2014 até 2020 ocupou o cargo de diretor-presidente da FAFITPE, Fundação de Apoio e Fomento a Inovação Tecnológica a Pesquisa e ao Ensino do IPEN. Desde 2019 ocupa o cargo de Vice-diretor de Pesquisa e gerente de Internacionalização do IPEN. Na função de gerente da Internacionalização, ele implementou até agora 14 acordos bilaterais com universidades e institutos de toda parte do mundo, entre estes a Battelle Energy Alliance que engloba oito das maiores instituições federais de pesquisa dos EUA. Em 2018 foi o responsável pela organização da Escola de Verão André Swieca e a Escola São Paulo de Ciencia Avançada FAPESP "Laserfrontiers.com" com 141 alunos dos quais 40 de fora da america latina. Foi editor associado das revistas Optics Express e Optical Materials Express e atualmente atua como editor associado da revista Frontiers, especialidade Optical Nanostructures. É especialista em desenvolvimento de lasers e atua nos principais segmentos: Lasers de diodo, Guias de onda, Lasers de estado sólido, Aplicações de lasers nas ciências da vida, Lasers em aplicações nucleares, Espectroscopia ótica e materiais para meios Laser em geral. Desde 2008 desenvolve fontes de luz em materiais desordenados, ou "Lasers Randômicos", para fins de aplicações em dispositivos ópticos. Possui 4 cartas de patente e 7 pedidos no total, 190 artigos internacionais com mais de 2000 citações e fator h de 26 (Scopus). (Texto extraído do Currículo Lattes em 14 out. 2021)

Projetos de Pesquisa
Unidades Organizacionais
Cargo

Resultados de Busca

Agora exibindo 1 - 10 de 11
  • Artigo IPEN-doc 30189
    Highly-efficient, dual-wavelength Nd:YLF laser emitting at 1314 nm and 1047 nm
    2023 - PRADO, FELIPE M.; FRANCO, TOMAS J.; WETTER, NIKLAUS U.
    We report a record optical-to-optical efficiency of 43% and a slope efficiency of 48% for a Nd: YLF laser emitting at 1314 nm. The crystal was side-pumped by a VBG-equipped diode emitting at 797 mn, with a peak power of 1545 W. We also report simultaneous dual-wavelength emission, at 1313 nm and 1047 nm.
  • Artigo IPEN-doc 30184
    Sub-nanosecond microchip oscillator for a MOPA system tailored for tattoo removal
    2023 - CATARINA, MARCUS V.; BERECZKI, ALLAN; WETTER, NIKLAUS U.
    In this work we study a microchip laser designed to function as an oscillator in a Master-Oscillator Power-Amplifier (MOPA) system targeted for laser tattoo removal. Different configurations of the Nd: YAG resonator were used by changing the output coupler mirror reflectivities and the initial transmission of the Q-switch. The quasi-CW resonator provided 55.4 W of output with 51.31% and 78.2% optical and slope efficiencies, respectively. For Q-switched operation, the best configuration resulted in a peak output power of 3.6 MW with 588 ps pulse width.
  • Artigo IPEN-doc 30183
    Compact, high power CW ring laser resonator
    2023 - BERECZKI, ALLAN; MENEZES, FELIPE C. de; WETTER, NIKLAUS U.
    We demonstrated the dynamically stable operation of aNd: YAG ring laser with 51.8 W of linearly polarized, continuous output power. The laser was based on laser modules side-pumped by diode bars. The resonator, aimed at single-frequency operation, is a design improvement from a previous work with the resonator length 4.3 times smaller than the previous design, thus resulting in a larger free spectral range, favoring for operation at single-frequency.
  • Artigo IPEN-doc 30102
    Results in highly-efficient side-pumped Nd:YLF lasers
    2023 - PRADO, FELIPE M.; FRANCO, TOMAS J.; VIEIRA, TARCIO de A.; DEANA, ALESSANDRO M.; WETTER, NIKLAUS U.
    Here we present resents advancements in Nd:YLF lasers, achieving record-breaking efficiency and output energies. In Q-switched operation, we obtained output energy of 41.2 mJ with peak power of 46 MW. Furthermore, we achieved a near quantum-defect slope efficiency of 78.2%, the highest reported for Nd:YLF lasers. We also present efficient 1314 nm laser emission.
  • Artigo IPEN-doc 30049
    Modern diode pumped solid state lasers
    2023 - WETTER, NIKLAUS U.; PRADO, FELIPE M.; VIEIRA, TARCIO de A.; DEANA, ALESSANDRO M.
    A brief review of the advances in diode-pumped, Neodymium-doped, high-efficiency lasers is presented, showing how different configurations were able to achieve extremely elevated slope efficiencies, close to the quantum limit, while demonstrating excellent beam quality.
  • Artigo IPEN-doc 28758
    Nd:YLF laser pumped at 797 nm with 68% slope efficiency
    2022 - PRADO, FELIPE M.; WETTER, NIKLAUS U.
    We demonstrate a Nd:YLiF4 laser emitting at the 1053nm transition while side-pumped at 797nm by a VBG equipped diode. Initially, a plane-concave cavity is employed using a total internal reflection at the crystal pump face. The laser operated in QCW-mode and produced 68% of slope and 66% of optical efficiency with 67 W of peak output power, while having a multimode beam quality. These efficiencies are the highest ever reported for the Nd:YLF4 pumped at 800nm.
  • Artigo IPEN-doc 28141
    Dynamically stable single frequency ring resonator from diode pumped Nd:YAG modules with 55.6 W of output power
    2021 - BERECZKI, ALLAN; FERREIRA, AMAURI A.; WETTER, NIKLAUS U.
    A Nd:YAG rod single-frequency ring laser based on side-pumped commercial modules is presented. Thermally induced birefringence compensation was applied in a dynamically stable resonator providing 55.6 W of continuous, linearly polarized, TEM00 output. The particular case of a symmetric ring resonator containing one or two focusing rods and a pair of curved mirrors was analyzed and a design technique is presented, allowing for easy, continuous shaping of the stability limits by changing only the distances in the resonator.
  • Artigo IPEN-doc 28110
    Record optical efficiency for a diode-side-pumped Nd:YLiF4 laser operating at 1053 nm
    2021 - PRADO, FELIPE M.; WETTER, NIKLAUS U.
    Here we compare the efficiency and beam parameters of different single-bounce Nd:YLF4 resonators. A total of five cavities were made by changing both, the curved mirror and the output coupler of the resonator. The best configuration resulted in a cavity that generated a record optical-to-optical efficiency of 63.3% and 66.4% of slope efficiency, with a peak output power of 64.5 W for a pumping power of 101.8 W at 797 nm.
  • Resumo IPEN-doc 27820
    Focus issue introduction
    2021 - PETERSEN, ALAN; TACCHEO, STEFANO; MIROV, SERGEY; NILSSON, JOHAN; PASK, HELEN; SARACENO, CLARA; WETTER, NIKLAUS; WU, RUIFEN
    This Joint Issue of Optics Express and Optical Materials Express features 15 articles written by authors who participated in the international online conference Advanced Solid State Lasers held 13–16 October, 2020. This review provides a summary of the conference and these articles from the conference which sample the spectrum of solid state laser theory and experiment, from materials research to sources and from design innovation to applications.
  • Resumo IPEN-doc 27819
    Focus issue introduction
    2021 - PETERSEN, ALAN; TACCHEO, STEFANO; MIROV, SERGEY; NILSSON, JOHAN; PASK, HELEN; SARACENO, CLARA; WETTER, NIKLAUS; WU, RUIFEN
    This Joint Issue of Optics Express and Optical Materials Express features 15 articles written by authors who participated in the international online conference Advanced Solid State Lasers held 13–16 October, 2020. This review provides a summary of the conference and these articles from the conference which sample the spectrum of solid state laser theory and experiment, from materials research to sources and from design innovation to applications.