CARLOS ALEXANDRE DE JESUS MIRANDA

Projetos de Pesquisa
Unidades Organizacionais
Cargo

Resultados de Busca

Agora exibindo 1 - 10 de 66
  • Resumo IPEN-doc 30153
    Correlations of mechanical properties by SPT (Small Punch Test) and conventional tensile test for Al 6061 – T6
    2023 - LOBO, RAQUEL de M.; CASTAGNET, MARIANO; MIRANDA, CARLOS A. de J.; FALOPPA, ALTAIR A.; LIMA, JOSE R. de; MATTAR NETO, MIGUEL; PEREIRA, LETICIA dos S.; ANDRADE, ARNALDO H.P. de
    The Small Punch Test (SPT) was development by nuclear industries to analyses mechanical properties of irradiated materials principally by small volume of the samples. This technique intend to evaluate the materials behavior during the time life of nuclear reactors, where yours properties changed by irradiation intensity and exposition time. It is considered an almost ¨non-destructive” method [2] due to small sample volume and its applications are spreading for use in situations where conventional methods do not apply. SPT consists of pressing a sphere, with a diameter equal to 2.5 mm, in a miniaturized sample of circular geometry (diameter d = 8 mm and thickness about 0.5 mm)[1], which has fixed edges, tested in conventional mechanical testing machines with the aid of a device developed for their achievement. In this work, mechanical properties of aluminum (Al 6061-T6) were abstained by two different methods: conventional tensile test and the small punch test (SPT). The SPT results depends on graph interpretations and discussions take place at now. Correlations of results guide us in choosing the most appropriated method for interpreting the force x displacement graph from SPT.
  • Resumo IPEN-doc 29197
    The use of miniaturized samples to determine mechanical properties of materials
    2022 - LOBO, RAQUEL de M.; CASTAGNET, MARIANO; MIRANDA, CARLOS A. de J.; LIMA, JOSE R. de; FALOPPA, ALTAIR A.; MATTAR NETO, MIGUEL; PEREIRA, LETICIA dos S.; ANDRADE, ARNALDO H.P. de
    The caracterization of irradiated materials through the SPT (Small Punch Test) technique uses miniaturized samples, with 8 mm in diameter and 0.5 mm in thickness, which has fixed edges, pressed by a sphere that has a diameter d=2.5 mm[1], tested in convencional mechanical testing machines, with the aid of a device developed for their achivement. This tecnique developed for nuclear industry can be used where conventional methods do not apply because it is considered an almost “non-destructive” method[2]due to the small sample volume. In this work two different devices were developed to perform tests at room and sub-zero temperature. The SPT tests will be carried out on standardized nuclear materials unirradiated (ferritic and stainless steels) for later correlation with conventional mechanical tests. Several mechanical properties will be obtained such as yield stress, tensile strength and fracture properties of the materials such as its toughness.
  • Artigo IPEN-doc 28279
    Small punch tests with a recently developed device in IPEN
    2021 - MIRANDA, C.A.J.; ANDRADE, A.H.P. de; CASTAGNET, M.; LOBO, R.M.; FALOPPA, A.A.; MATTAR NETO, M.; LIMA, J.R.; PEREIRA, L.S.
  • Artigo IPEN-doc 28278
    Small punch test devices in development at IPEN aiming to perform tests in RMB hot cells
    2021 - MIRANDA, C.A.J.; LIMA, J.R.; FALOPPA, A.A.; ANDRADE, A.H.P. de; MATTAR NETO, M.; CASTAGNET, M.; LOBO, R.M.; PEREIRA, L.S.
  • Artigo IPEN-doc 28251
    Numerical analysis of the small punch test for different theoretical materials
    2021 - PEREIRA, L.S.; MATTAR NETO, M.; MIRANDA, C.A.J.; LIMA, J.R.; FALOPPA, A.A.; ANDRADE, A.H.P. de; CASTAGNET, M.; LOBO, R.M.
  • Relatório IPEN-doc 28312
    Análise Estrutural Preliminar da Solda Externa do Suporte M24
    2021 - MATTAR NETO, MIGUEL; MIRANDA, CARLOS A. de J.; FALOPPA, ALTAIR A.
  • Relatório IPEN-doc 28311
    Análise Estrutural Preliminar do Fundo da Piscina de Estocagem de Combustíveis Queimados do N03
    2021 - MATTAR NETO, MIGUEL; MIRANDA, CARLOS A. de J.; FALOPPA, ALTAIR A.
  • Relatório IPEN-doc 24285
    Apoio à DRS – Angra 3 – PT – Prédio UJB-UJE acima da cota +28.15m e Colunas
    2018 - MIRANDA, CARLOS A. de J.; MATTAR NETO, MIGUEL
    Neste relatório apresenta-se o texto do Parecer Técnico encaminhado ao GT-Civil da DRS para revisão dos seus demais membros, que embasará a autorização da DRS à continuidade das obras no Prédio (ou parte do) UJB-UJE acima da cota 28,15m, da usina de Angra 3.
  • Relatório IPEN-doc 24284
    Apoio à DRS – Angra 3 – PT – Caixas de Passagem de Tubulação do PEB 1–5UPX
    2018 - MIRANDA, CARLOS A. de J.; MATTAR NETO, MIGUEL
    Neste relatório apresenta-se o texto do Parecer Técnico encaminhado ao GT-Civil da DRS para revisão dos seus demais membros, que embasará a autorização da DRS à continuidade das obras das Caixas de Passagem de Tubulação do PEB 1-5UPX, da usina de Angra 3.
  • Relatório IPEN-doc 24283
    Apoio à DRS – Angra 3 – PT – Câmara de Compensação de Água de Serviço para o PEB - UQZ
    2018 - MIRANDA, CARLOS A. de J.; MATTAR NETO, MIGUEL
    Neste relatório apresenta-se o texto do Parecer Técnico encaminhado ao GT-Civil da DRS para revisão dos seus demais membros, que embasará a autorização da DRS à continuidade das obras (concretagem) da Câmara de Compensação de Água de Serviço para o PEB 4UQZ, da usina de Angra 3.