BARROS, L.F.DIAS, M.S.KOSKINAS, M.F.2022-05-042022-05-042022BARROS, L.F.; DIAS, M.S.; KOSKINAS, M.F. Experimental determination of k0 and Q0 values for 121Sb, 123Sb and 130Ba targets applying covariance analysis. <b>Applied Radiation and Isotopes</b>, v. 184, p. 1-7, 2022. DOI: <a href="https://dx.doi.org/10.1016/j.apradiso.2022.110122">10.1016/j.apradiso.2022.110122</a>. Disponível em: http://repositorio.ipen.br/handle/123456789/33033.0969-8043http://repositorio.ipen.br/handle/123456789/33033This work consists of an experimental determination of k0 and Q0 for 121Sb, 123Sb and 130Ba targets. Covariance analysis has been introduced to supply not only the overall uncertainties in these parameters but also their correlations. The irradiations were performed near the core of the IEA-R1 4.5 MW swimming-pool nuclear research reactor of the Nuclear and Energy Research Institute (IPEN-CNEN/SP), in São Paulo, Brazil. The epithermal neutron flux shape parameter, alpha, at the irradiation position is very close to zero, which favors to obtain Q0 values more accurately. Two irradiations were carried out in sequence, using two sets of samples: the first with bare samples and the second inside a Cd cover. The activity measurements were carried out in a previously calibrated HPGe gamma-ray spectrometer. The measurements were corrected for: saturation, decay time, cascade summing, geometry, self-attenuation, measuring time and mass. Standard sources of 152Eu, 133Ba, 60Co and 137Cs traceable to a 4πβ−γ primary system were used to obtain the HPGe gamma-ray peak efficiency as a function of the energy. The experimental efficiency curve was performed by a fourth-degree polynomial fit, in the energy range of the standard sources, 121–1408 keV, it contains all correlations between points. For energies above 1408 keV, the efficiencies were obtained by the Monte Carlo Method. The covariance matrix methodology was applied to all uncertainties involved. The final values for k0 and Q0 were compared with the literature.1-7openAccessgamma spectroscopymonte carlo methodmonte carlo methodantimony isotopesbarium 130reactorsantimony 123antimony 121Experimental determination of k0 and Q0 values for 121Sb, 123Sb and 130Ba targets applying covariance analysisArtigo de periódico18410.1016/j.apradiso.2022.1101220000-0001-8407-9833https://orcid.org/0000-0001-8407-9833https://orcid.org/0000-0003-2478-575732.546