MARIANA XAVIER MILAGRE
3 resultados
Resultados de Busca
Agora exibindo 1 - 3 de 3
Artigo IPEN-doc 26986 Intergranular corrosion susceptibility of Al-Cu-Li alloys2017 - MILAGRE, MARIANA X.; MACHADO, CARULINE S.C.; ARAUJO, JOAO V.; ASTARITA, ANTONELLO; PEBERE, NADINE; VIVIER, VINCENT; COSTA, ISOLDAIn the present study, the intergranular corrosion (IGC) susceptibility of commercial Al-Cu-Li alloys of the third generation (AA2098-T351, AA2198-T3 and AA2198-T851) was compared with that of the AA2024-T3 alloy according to ASTM G110 test. In addition, anodic and cathodic polarization curves were carried out in the ASTM G110 test solution at room temperature. The cross-section of the samples after the ASTM G110 test was observed by scanning electron microscopy (SEM) to evaluate the extension of the corrosion attack. The susceptibility to intergranular attack of the tested alloys was ranked according to the attack by IGC and from the anodic and cathodic polarization curves. The results showed that the AA2024-T3 and the AA2198-T3 alloys presented higher susceptibility to intergranular corrosion comparatively to the other alloys tested (AA2098-T351 and AA2198-T851). The AA2098-T351 alloy was associated to the highest resistance to intergranular attack among the alloys evaluated. A correlation was seemingly established between the stress relief treatment of the alloy and its corresponding susceptibility to intergranular or intragranular corrosion.Artigo IPEN-doc 26823 Effects of chloride ion concentration on the corrosion behavior of the AA2198-T8 alloy2019 - MACHADO, CARULINE de S.C.; SILVA, REJANE M. da; ARAUJO, JOAO V. de S.; DONATUS, UYIME; MILAGRE, MARIANA X.; KLUMPP, RAFAEL E.; ROSSI, JESUALDO L.; COSTA, ISOLDAIn this work, the influence of chloride ions concentration on the corrosion behavior of the AA2198-T8 alloy was evaluated. Immersion test and electrochemical analyses were performed in sodium chloride solutions of three concentrations, 0.001 mol L-1, 0.005 mol L-1 and 0.01 mol L-1. The results showed that the AA2198-T8 alloy was susceptible to localized corrosion (LC) and to severe localized corrosion (SLC) in all conditions investigated. The electrochemical results obtained by open circuit potential measurements, cyclic voltammetry and potentiodynamic polarization curves were associated with the corroded microstructure of the alloy. Although electrochemical techniques allowed differentiating the corrosion resistance as a function of chloride concentration, the result was strongly influenced by the corroded/uncorroded area ratio related to the SLC.Artigo IPEN-doc 24194 Study on welding thermal cycle and residual stress of UNS S32304 duplex steel selected as external shield for a transport packaging of Mo-992017 - BETINI, EVANDRO G.; GOMES, MAURILIO P.; MILAGRE, MARIANA X.; MACHADO, CARULINE S.C.; REIS, LUIS A.M.; MUCSI, CRISTIANO S.; ORLANDO, MARCOS T.D.; LUZ, TEMISTOCLES S.; ROSSI, JESUALDO L.