MARIANA XAVIER MILAGRE

Projetos de Pesquisa
Unidades Organizacionais
Cargo

Filtros

2018 - 201922020 - 20222
Limpar filtros

Configurações

search.filters.applied.f.ispartof: Materials Characterization ×

Resultados de Busca

Agora exibindo 1 - 4 de 4
  • Imagem de Miniatura
    Artigo IPEN-doc 29075
    Surface finishing effects on the corrosion behavior and electrochemical activity of 2098-T351 aluminum alloy investigated using scanning microelectrochemical techniques
    2022 - SILVA, REJANE M.P. da; MILAGRE, MARIANA X.; IZQUIERDO, JAVIER; BETANCOR-ABREU, ABENCHARA M.; OLIVEIRA, LEANDRO A. de; ARAUJO, JOAO V. de S.; ANTUNES, RENATO A.; SOUTO, RICARDO M.; COSTA, ISOLDA
    The effects of surface finishing on the corrosion behavior and electrochemical activity of AA2098-T351 (Al–Cu–Li alloy) were investigated on the basis of the correlation between surface chemistry, microstructure and electrochemical activity. The alloy was evaluated in the as-received and polished conditions. The morphology of the two types of surfaces was investigated using confocal laser scanning microscopy (CLSM), optical microscopy and optical 3D profilometry. The surface chemistry was analyzed by X-ray photoelectron spectroscopy (XPS) and energy dispersive X-ray spectroscopy (EDX). Scanning microelectrochemical techniques (namely, localized electrochemical impedance spectroscopy (LEIS), the scanning vibrating electrode technique (SVET) and scanning electrochemical microscopy (SECM) in potentiometric mode) were used to examine the electrochemical activity of the surfaces. The results showed that on the as-received surface, the near surface deformed layer (NSDL), which is composed of Mg-rich bands, influenced the corrosion activity of the alloy. Higher electrochemical activity and greater susceptibility to severe localized corrosion were related to the polished surface condition compared to the as-received one.
  • Imagem de Miniatura
    Artigo IPEN-doc 27812
    How microstructure affects localized corrosion resistance of stir zone of the AA2198-T8 alloy after friction stir welding
    2021 - MACHADO, CARULINE de S.C.; DONATUS, UYIME; MILAGRE, MARIANA X.; ARAUJO, JOAO V. de S.; VIVEIROS, BARBARA V.G. de; KLUMPP, RAFAEL E.; PEREIRA, VICTOR F.; COSTA, ISOLDA
    In this study, the microstructure and corrosion resistance of the stir zone (SZ) of the AA2198-T8 Al-Cu-Li alloy welded by friction stir welding (FSW) were investigated by microscopy, immersion tests and electrochemical techniques such as measurements of open circuit potential variation with time, and scanning vibrating electrode technique (SVET) measurements. A low chloride-containing solution (0.005 mol L−1 NaCl) was employed in the corrosion studies and severe localized corrosion (SLC) was observed in the SZ related to intergranular attack. The results were compared to those of the non-affected areas by FSW, also known as base metal (BM). In the BM, SLC was found and the type of attack related to it was intragranular. In both zones, BM and SZ, SLC was due to precipitates of high electrochemical activity, specifically T1 (Al2CuLi) phase in the BM, whereas TB (Al7Cu4Li) / T2 (Al6CuLi3) in the SZ. Scanning vibrating electrode technique (SVET) analysis was very useful in the study of SLC in the AA2198-T8 alloy showing the development of high anodic current densities at the mouth of the SLC sites.
  • Imagem de Miniatura
    Artigo IPEN-doc 25087
    Correlation between corrosion resistance, anodic hydrogen evolution and microhardness in friction stir weldment of AA2198 alloy
    2018 - DONATUS, UYIME; VIVEIROS, BARBARA V.G. de; ALENCAR, MAICON C. de; FERREIRA, RAPHAEL O.; MILAGRE, MARIANA X.; COSTA, ISOLDA
    Correlation between corrosion resistance, anodic hydrogen evolution and microhardness in the friction stir weldment of AA2198-T851 alloy has been investigated. Different microscopy techniques, scanning vibrating electrode technique (SVET) and potentiodynamic polarization tests were employed in the investigation. Unlike other 3rd generation Al-Cu-Li alloys where the regions that are most susceptible to corrosion are always within the weld region, the results reveal that the parent material is the most susceptible in this case. There is a direct correlation between corrosion resistance, anodic hydrogen evolution and microhardness in the weldment, and the T1 phase is associated with the direct correlation.
  • Imagem de Miniatura
    Artigo IPEN-doc 24759
    On the microstructure characterization of the AA2098-T351 alloy welded by FSW
    2018 - MILAGRE, MARIANA X.; MOGILI, NAGA V.; DONATUS, UYIME; GIORJAO, RAFAEL A.R.; TERADA, MAYSA; ARAUJO, JOAO V.S.; MACHADO, CARULINE S.C.; COSTA, ISOLDA
    The complex structure of the AA2098-T351 alloy welded by friction stir welding (FSW) was investigated by transmission electron microscopy (TEM), differential scanning calorimetry (DSC) and microhardness measurements. Thermal modelling process of the FSW process was carried out by soldering thermocouples at distances of 6, 9 and 12 mm from the weld centerline, and thermocouple measurements were used as input data into the model. Finite element software COMSOL v5.2 was used for data analysis. The prevailing phases in the base metal (BM) are T1 (Al2CuLi) theta' (Al2Cu), delta'/beta'(Al-3(Li,Zr)) and Omega (Al2Cu). In the heat affected zone (HAZ), either in the retreating or advancing sides, theta' phase was not identified. In the thermomechanical affected zone (TMAZ), T1, delta'/beta', GP zones phase were detected in the retreating side, whereas T1 and Guinier-Preston (GP) zones were not observed in the advancing side. This result supports the asymmetric behavior observed in the microhardness profile of the weld. In the stir zone (SZ), GP zones, T1, delta'/beta' (Al-3(Li,Zr)) and Omega were identified.