MARIANA XAVIER MILAGRE
4 resultados
Resultados de Busca
Agora exibindo 1 - 4 de 4
Artigo IPEN-doc 27712 Corrosion protection of the AA2198-T8 alloy by environmentally friendly organic-inorganic sol-gel coating based on bis-1,2-(triethoxysilyl) ethane2021 - KLUMPP, RAFAEL E.; DONATUS, UYIME; SILVA, REJANE M.P. da; ANTUNES, RENATO A.; MACHADO, CARULINE de S.C.; MILAGRE, MARIANA X.; ARAUJO, JOAO V. de S.; VIVEIROS, BARBARA V.G. de; COSTA, ISOLDAIn this work, a surface coating composed of organic‐inorganic hybrid sol‐gel based on bis‐1,2‐(triethoxysilyl) (BTSE) ethane was applied on AA2198‐T8 samples, and its effect on corrosion resistance was investigated and compared with that of a chromate layer formed in a solution with hexavalent chromium ions. The corrosion resistance of BTSE coated samples was evaluated by immersion tests in sodium chloride solution (0.005 mol/L NaCl) and monitored by global electrochemical techniques such as electrochemical impedance spectroscopy (EIS) and local electrochemical techniques such as scanning vibrating electrode technique (SVET) and scanning electrochemical microscopy (SECM). The formed coating layers were characterized by X‐ray photoelectron spectroscopy (XPS). The results pointed out that the BTSE is an effective alternative coating for corrosion protection of new generation Al‐Cu‐Li alloys and could replace chromates obtained in toxic and carcinogenic CrVI containing solutions leading to improved corrosion protection.Artigo IPEN-doc 26516 The local electrochemical behavior of the AA2098‐T351 and surface preparation effects investigated by scanning electrochemical microscopy2019 - SILVA, REJANE M.P. da; MILAGRE, MARIANA X.; OLIVEIRA, LEANDRO A. de; DONATUS, UYIME; ANTUNES, RENATO A.; COSTA, ISOLDAIn this work, scanning electrochemical microscopy (SECM) measurements were employed to characterize the electrochemical activities on polished and as‐received surfaces of the 2098‐T351 aluminum alloy (AA2098‐T351). The effects of the near surface deformed layer (NSDL) and its removal by polishing on the electrochemical activities of the alloy surface were evaluated and compared by the use of different modes of SECM. Confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM) were also employed to characterize the morphology of the surfaces. The surface chemistry was analyzed by X‐ray photoelectron spectroscopy (XPS). The surface generation/tip collection (SG/TC) and competition modes of the SECM were used to study hydrogen gas (H2) evolution and oxygen reduction reactions, respectively. H2 evolution and oxygen reduction were more pronounced on the polished surfaces. The feedback mode of SECM was adopted to characterize the electrochemical activity of the polished surface that was previously corroded by immersion in a chloride‐containing solution, in order to investigate the influence of the products formed on the active/passive domains. The precorroded surface and as‐received surfaces revealed lower electrochemical activities compared with the polished surface showing that either the NSDL or corrosion products largely decreased the local electrochemical activities at the AA2098‐T351 surfaces.Artigo IPEN-doc 25861 Effect of surface treatments on the localized corrosion resistance of the AA2198‐T8 aluminum lithium alloy welded by FSW process2019 - MACHADO, CARULINE de S.C.; KLUMPP, RAFAEL E.; AYUSSO, VICTOR H.; DONATUS, UYIME; MILAGRE, MARIANA X.; ARAUJO, JOAO V. de S.; MACHADO, GLAUSON A.F.; COSTA, ISOLDAIn this work, the effect of eight types of surface treatments on the corrosion resistance of friction stir welded samples of an AA2198‐T8 Al‐Cu‐Li alloy were tested and compared in an attempt to find suitable alternatives to toxic and carcinogenic hexavalent chromium treatments. All the samples were anodized and subjected to different post‐anodizing treatments. The post‐anodizing treatments were (1) hydrothermal treatment in Ce (NO3)3 6H2O solution; (2) hydrothermal treatment in Ce (NO3)3 6H2O solution with H2O2; (3) hydrothermal treatment in boiling water; (4) hexavalent chromium conversion coating; and (5) immersion in BTSE (bis‐1,2‐(triethoxysilyl) ethane. The corrosion resistance of the treated samples was evaluated by immersion tests in sodium chloride solution (0.1 mol L−1 NaCl) and electrochemical impedance spectroscopy (EIS) of the friction stir weldment. The results showed that among the alternative treatments, the Ce‐containing solutions presented the best corrosion resistance, especially when used without peroxide.Artigo IPEN-doc 25834 The effect of surface pretreatment on the corrosion behaviour of silanated AA2198‐T851 Al‐Cu‐Li alloy2019 - DONATUS, UYIME; KLUMPP, RAFAEL E.; MOGILI, NAGA V.V.; ANTUNES, RENATO A.; MILAGRE, MARIANA X.; COSTA, ISOLDAThe corrosion behaviour of silanated AA2198‐T851 alloy substrates with and with no manufacturing‐process induced near‐surface deformed layer (MPI‐NSDL) has been investigated. Two methods (alkaline etching + desmutting and mechanical polishing) were employed in removing the MPI‐NSDL. Silanization was performed using 2‐bistriethoxysilylethane. Electrochemical impedance spectroscopy (EIS), salt spray test, and microscopy techniques were employed in the investigation of the corrosion behaviours. The studies revealed that polishing appeared to be the best silanating pre‐treatment (compared with degreasing and etching + desmutting) for the new generation AA2198‐T851 Al‐Cu‐Li alloy, and this was reflected in the EIS spectra. The etched + desmutted and the degreased surface with MPI‐NSDL did not respond well to silanization and presented more pitting sites per square millimeter. However, the severity of corrosion per pit was more on the polished sample compared with the other two. Also, the corrosion mechanisms were different for the three cases.