REJANE MARIA PEREIRA DA SILVA

REJANE MARIA PEREIRA DA SILVA

Página do item completo

Resultados de Busca

Agora exibindo 1 - 5 de 5

Corrosion behaviour of the 2098-T351 Al–Cu–Li alloy after different surface treatments
2022 - BARBOZA, WANESSA das G.; MILAGRE, MARIANA X.; DONATUS, UYIME; MACHADO, CARULINE de S.C.; RAMIREZ, OSCAR M.P.; ARAUJO, JOAO V. de S.; SILVA, REJANE M.P. da; COSTA, ISOLDA
The effect of different surface treatments on the corrosion resistance of the AA2098 Al–Cu–Li alloy has been investigated. Surface characterization was performed using 3D optical profilometry, energy dispersive X-ray spectroscopy and scanning electron microscopy. The corrosion resistance of the 2098 alloy after the surface treatments was investigated in 0.1 mol L−1 NaCl solution by electrochemical techniques and microscopy. Corrosion results showed that the untreated and the chemically etched surfaces were more active than the mechanically abraded and mechanically polished surfaces owing to differences in the nature of the native oxides formed after the surface treatments. Corrosion rate and mode were also affected by how close the exposed surface was to the mid-thickness region of the AA2098-T351 plate relative to the actual top surface (before polishing). This is associated with the variation in the volume fraction and distribution of the T1 phase as the mid-thickness region of the AA2098-T351 plate is approached.
Influence of chloride ions concentration on the development of severe localised corrosion and its effects on the electrochemical response of the 2198-T8 alloy
2021 - MACHADO, CARULINE de S.C.; SILVA, REJANE M.P. da; ARAUJO, JOAO V. de S.; MILAGRE, MARIANA X.; DONATUS, UYIME; VIVEIROS, BARBARA V.G. de; KLUMPP, RAFAEL E.; COSTA, ISOLDA
The development of severe localised corrosion (SLC) on the 2198-T8 alloy was investigated in solutions of various NaCl concentrations (0.001, 0.005 and 0.01 mol L−1). Immersion tests, optical profilometry, conventional and local electrochemical analyses were performed to evaluate the corrosion behaviour of the alloy. Immersion tests showed that the alloy is susceptible to SLC in all conditions, although the pits sizes were dependent on the solution concentration. The largest anodic areas, corresponding to SLC sites, were observed for the sample immersed in 0.001 mol L−1 NaCl, whereas pits with similar sizes were observed for the samples immersed in solutions with 0.005 and 0.01 mol L−1 of NaCl. Moreover, the maximum depth of attack was observed for the sample immersed in 0.001 mol L−1 NaCl. These results were in agreement with the scanning ionselective electrode technique (SIET) maps which showed stronger acidification on the sample exposed to 0.001 mol L−1 NaCl solution.
Surface analysis, microstructural characterization and local corrosion processes in decarburized SAE 9254 spring steel
2019 - SANTANA, JESSICA C.C. de C.; SILVA, REJANE M.P. da; ANTUNES, RENATO A.; SANTOS, SYDNEY F.
The aim of the present work was to study the surface chemistry, microstructure and local corrosion processes at the decarburized layer of the SAE 9254 automotive spring steel. The samples were austenitized at 850 and 900 °C, and oil quenched. The microstructure was investigated using confocal laser scanning microscopy and scanning electron microscopy. The surface chemistry was analyzed by X-ray photoelectron spectroscopy. Electrochemical impedance spectroscopy and potentiodynamic polarization were employed to assess the global corrosion behavior of the decarburized samples. Scanning electrochemical microscopy (SECM) was used to evaluate the influence of decarburization on the local corrosion activity. Microstructural characterization and XPS analysis indicate a dependence of the local electrochemical processes with the steel microconstituents and Si oxides in the decarburized layer.
Structural, adhesion and electrochemical characterization of electroless plated Ni-P-carbon black composite films on API 5L X80 steel
2019 - OLIVEIRA, MARA C.L. de; CORREA, OLANDIR V.; SILVA, REJANE M.P. da; LIMA, NELSON B. de; OLIVEIRA, JEFFERSON T.D. de; OLIVEIRA, LEANDRO A. de; ANTUNES, RENATO A.
In this work, composite Ni-P-carbon black coatings were obtained by electroless deposition on API 5L X80 substrates. The effect of carbon black on structural, adhesion and electrochemical properties of the plated samples was evaluated. Scanning electron microscopy analyses were carried out to examine the top surface and cross section of the films. Scratch tests were employed to evaluate coating adhesion properties. Potentiodynamic polarization tests were carried out to investigate the global electrochemical behavior of the deposited layers. Scanning electrochemical microscopy (SECM) was employed to measure local electrochemical activity over the coated surfaces. The carbon black concentration markedly affects the morphology, adhesion and electrochemical properties of the Ni-P-carbon black layers. The results point to an optimum carbon black content to achieve the best performance against corrosion. The coatings obtained at a carbon black concentration of 0.25 g L21 provided the best protection ability. The results are discussed with respect to coating morphology, adhesion and electrochemical activity.
Comparison of the corrosion resistance of an Al–Cu alloy and an Al–Cu–Li alloy
2019 - MILAGRE, MARIANA X.; DONATUS, UYIME; MACHADO, CARULINE S.C.; ARAUJO, JOAO V.S.; SILVA, REJANE M.P. da; VIVEIROS, BARBARA V.G. de; ASTARITA, ANTONELLO; COSTA, ISOLDA
In this study, the corrosion mechanisms of the AA2024-T3 and the AA2098-T351 were investigated and compared using various electrochemical techniques in 0.005 mol L−1 NaCl solution. The severe type of corrosion in the AA2098-T351 was intragranular attack (IGA) although trenching and pitting related to the constituent particles were seen. On the other hand, the AA2024-T3 exhibited severe localised corrosion associated with micrometric constituent particles, and its propagation was via grain boundaries leading to intergranular corrosion (IGC). Electrochemical techniques showed that the corrosion reaction in both alloys was controlled by diffusion. The non-uniform current distribution in both alloys showed that EIS was not a proper technique for comparing the corrosion resistance of the alloys. However, local electrochemical techniques were useful for the evaluation of the corrosion resistance of the alloys.