GABRIEL ANGELO
2 resultados
Resultados de Busca
Agora exibindo 1 - 2 de 2
Resumo IPEN-doc 24614 A CFD numerical model for the flow distribution in a MTR fuel element2017 - ANDRADE, D.A.; ANGELOA, G.; ANGELO, E.; SANTOS, P.H.G.; OLIVEIRA, F.B.V.; TORRES, W.M.; UMBEHAUN, P.E.; SOUZA, J.A.B.; BELCHIOR JUNIOR, A.; SABUNDJIAN, G.; PRADO, A.C.Previously, an instrumented dummy fuel element (DMPV-01), with the same geometric characteristics of a MTR fuel element, was designed and constructed for pressure drop and flow distribution measurement experiments at the IEA-R1 reactor core. This dummy element was also used to measure the flow distribution among the rectangular flow channels formed by element fuel plates. A CFD numerical model was developed to complement the studies. This work presents the proposed CFD model as well as a comparison between numerical and experimental results of flow rate distribution among the internal flow channels. Numerical results show that the model reproduces the experiments very well and can be used for the studies as a more convenient and complementary tool.Resumo IPEN-doc 24581 CFD analysis of blockage length on a partially blocked fuel rod2017 - SCURO, N.L.; ANGELO, G.; ANGELO, E.; ANDRADE, D.A.In LOCA accidents, fuel rods may balloon by the increasing of pressure difference between fuel rod and core vessel. With the balloon effect, the swelling can partially block the flow channel, affecting the coolability during reflood phase. In order to analyze the influence of blockage length after LOCA events, many numerical simulations using Ansys-CFX code have been done in steady state condition, characterizing the final phase of reflood. Peaks of temperature are observed in the middle of the fuel rod, followed by a temperature drop. This effect is justified by the increasing of heat transfer coefficient, originated from the high turbulence effects. Therefore, this paper considers a radial blockage of 90%, varying just the blockage length. This study observed that, for the same boundary conditions, the longer the blockage length originated after LOCA events, the higher are the central temperatures in the fuel rod.