MARCELLO VERTAMATTI MERGULHAO

Projetos de Pesquisa
Unidades Organizacionais
Cargo

Filtros

20172
Limpar filtros

Configurações

Tipo de publicação: Artigo de periódico × Assunto: melting ×

Resultados de Busca

Agora exibindo 1 - 2 de 2
  • Imagem de Miniatura
    Artigo IPEN-doc 23179
    Mechanical properties and microstructural characterization of Cobalt-Chromium (CoCr) obtained by casting and Selective Laser Melting (SLM)
    2017 - MERGULHAO, MARCELLO V.; PODESTA, CARLOS E.; NEVES, MAURICIO D.M. das
    The aim of this study is the consolidation of Cobalt-Chromium (CoCr) alloy powder using the additive manufacturing - selective laser melting (SLM) and the investment casting techniques. The research of this study has been applied to their biomaterial applied to development of prosthesis and dental implants. The gas atomized powder are spherical (mean diameter equal to 42,74 μm) and was analyzed by their physical and chemical properties. The microstructure of the powder and specimens was evaluated using optical microscope (OM) and scanning electron microscope with energy-dispersed X-ray spectroscopy (SEM-EDS). The mechanical properties were evaluated of standard samples using a tensile (yield strength, maximum tensile, rupture tensile and elongation), three point bending (transverse rupture strength) and micro hardness tests. The mechanical results indicate higher values for the SLM than casting specimens. The micrographs revealed a characteristic morphology of laser been used in the SLM technique and the dendrites in the casting technique. The microstructure of samples made by SLM is thinner than the samples obtained in the cast.
  • Imagem de Miniatura
    Artigo IPEN-doc 23180
    Valuation of mechanical properties and microstructural characterization of ASTM F75 Co-Cr alloy obtained by Selective Laser Melting (SLM) and casting techniques
    2017 - MERGULHAO, MARCELLO V.; PODESTA, CARLOS E.; NEVES, MAURICIO D.M. das
    Advances in processes using the powder metallurgy techniques are making this technology competitive compared to the other traditional manufacturing processes, especially in medicine area. The additive rapid prototyping technique – selective laser melting (SLM) was applied in a biomaterial of CoCrMoFe alloy (ASTM F75), to study the mechanical properties and microstructural characterization in comparison between the conventional technique – casting. The gas atomized powder was investigated by their physical (as apparent density, bulk density and flow rate) and the chemical properties. The powder was analyzed using scanning electron microscope with energy-dispersed X-ray spectroscopy (SEM-EDS) and X-ray fluorescence. Specimens of standard samples were manufactured using these techniques to evaluate the mechanical properties as uniaxial tensile (yield strength, rupture tensile and elongation), transverse rupture strength and the micro hardness. The mechanical properties showed higher values in the SLM specimens than the casting specimens. Before the mechanical tests the specimens were examined using optical microscope (OM) and SEM-EDS. The micrographs revealed a microstructure with finer morphology in the SLM technique and the dendrites in the casting technique.