TALITA GISHITOMI FUJIMOTO
2 resultados
Resultados de Busca
Agora exibindo 1 - 2 de 2
Artigo IPEN-doc 29908 Mechanical and electrical characterization of 8YSZ-ScCeSZ ceramics2023 - FUJIMOTO, T.G.; SERIACOPI, V.; FERREIRA, L.A.S.; MACHADO, I.F.; MUCCILLO, E.N.S.The effects of small amounts (up to 5 wt.%) of scandia- and ceria-stabilized zirconia on the electrical conductivity, and the elastic modulus and hardness of yttria-stabilized zirconia were investigated by impedance spectroscopy and nanoindentation tests, respectively. The main purpose of this work was to obtain solid electrolyte compounds with improved properties compared to those of the base materials. Solid electrolytes compounds were prepared by solid-state reaction synthesis with sintering at 1450 ºC for 4 h. All prepared compounds exhibit a cubic fluorite-type structure. The microstructure of the compounds consists of polygonal grains with low (< 2%) porosity. The mean grain size estimated by the intercept method was 5 ± 1 μm. The electrical conductivity of the compound ceramics is lower than that of the base material. Addition of scandia-stabilized zirconia is found to exert a beneficial effect on the matrix by increasing the elastic modulus, achieving 221 MPa for 5 wt.% of the additive.Artigo IPEN-doc 28882 Phase transformation/stabilization and ionic conductivity in tantalum oxide co‑doped zirconia‑scandia solid electrolyte2022 - SOUZA, J.P.; FUJIMOTO, T.G.; BATISTA, R.M.; STEIL, M.C.; MUCCILLO, R.; MUCCILLO, E.N.S.The influence of small amounts of tantalum oxide as co-dopant on phase transformation and stabilization, microstructure and ionic conductivity of zirconia-10 mol% scandia is reported in this work. Cylindrical pellets were prepared by solid state synthesis with sintering at 1500 °C for 5 h. High relative density values (> 95%) were achieved. Reduction of the enthalpy for the cubic ⇌β-rhombohedral phase transformation was found for increasing amounts of the co-dopant. Full stabilization of the cubic structure at room temperature was obtained with only 0.45 mol% tantalum oxide addition. The ionic conductivity of sintered specimens was investigated as a function of the temperature and oxygen partial pressure by impedance spectroscopy. The fully stabilized co-doped system revealed a pure ionic conduction behavior up to 800 °C with wide electrolytic domain. In the 700–800 °C range, the ionic conductivity of co-doped specimens is similar to that of pure zirconia-scandia.