TALITA GISHITOMI FUJIMOTO
2 resultados
Resultados de Busca
Agora exibindo 1 - 2 de 2
Artigo IPEN-doc 29908 Mechanical and electrical characterization of 8YSZ-ScCeSZ ceramics2023 - FUJIMOTO, T.G.; SERIACOPI, V.; FERREIRA, L.A.S.; MACHADO, I.F.; MUCCILLO, E.N.S.The effects of small amounts (up to 5 wt.%) of scandia- and ceria-stabilized zirconia on the electrical conductivity, and the elastic modulus and hardness of yttria-stabilized zirconia were investigated by impedance spectroscopy and nanoindentation tests, respectively. The main purpose of this work was to obtain solid electrolyte compounds with improved properties compared to those of the base materials. Solid electrolytes compounds were prepared by solid-state reaction synthesis with sintering at 1450 ºC for 4 h. All prepared compounds exhibit a cubic fluorite-type structure. The microstructure of the compounds consists of polygonal grains with low (< 2%) porosity. The mean grain size estimated by the intercept method was 5 ± 1 μm. The electrical conductivity of the compound ceramics is lower than that of the base material. Addition of scandia-stabilized zirconia is found to exert a beneficial effect on the matrix by increasing the elastic modulus, achieving 221 MPa for 5 wt.% of the additive.Artigo IPEN-doc 28528 Electrical conductivity of La0.9Sr0.1Ga0.8Mg0.2O3-y-La1.55Sr0.45Ga3O7+δ composite electrolyte2021 - FUJIMOTO, T.G.; STEIL, M.C.; MUCCILLO, E.N.S.Doped lanthanum gallate constitutes a family of solid electrolytes with high ionic conductivity, wide electrolytic domain, and good chemical stability. The combination of its properties turns some compounds of this family promising candidates for application in solid oxide cells operating at intermediate temperatures. In this work, La0.9Sr0.1Ga0.8Mg0.2O3-y - xLa1.55Sr0.45Ga3O7+δ with x = 0, 1, and 5 wt.% were investigated aiming to obtain a composite solid electrolyte with optimized properties compared to the parent material. Composite electrolytes were prepared by solid state reaction method and evaluated for densification, phase content, and microstructure. Electrical conductivity measurements were carried out as a function of temperature and oxygen partial pressure. Increase on densification and structural homogeneity were obtained with increasing fraction of the melilite phase. The electrical conductivity determined by impedance spectroscopy revealed a decrease of the bulk resistivity for increasing amounts of La1.55Sr0.45Ga3O7+δ.