LAURO ROBERTO DOS SANTOS
4 resultados
Resultados de Busca
Agora exibindo 1 - 4 de 4
Artigo IPEN-doc 23197 Effect of Al(OH)3 on the sintering of UO2–Gd2O3 fuel pellets with addition of U3O8 from recycle2017 - SANTOS, LAURO R. dos; DURAZZO, MICHELANGELO; CARVALHO, ELITA F.U. de; RIELLA, HUMBERTO G.The incorporation of gadolinium as burnable poison directly into nuclear fuel is important for reactivity compensation, which enables longer fuel cycles. The function of the burnable poison fuel is to control the neutron population in the reactor core during its startup and the beginning of the fuel burning cycle to extend the use of the fuel. The implementation of UO2-Gd2O3 poisoned fuel in Brazil has been proposed according to the future requirements established for the Angra-2 nuclear power plant. The UO2 powder used is produced from the Ammonium Uranyl Carbonate (AUC). The incorporation of Gd2O3 powder directly into the AUC-derived UO2 powder by dry mechanical blending is the most attractive process, because of its simplicity. Nevertheless, processing by this method leads to difficulties while obtaining sintered pellets with the minimum required density. The cause of the low densities is the bad sintering behavior of the UO2-Gd2O3 mixed fuel, which shows a blockage in the sintering process that hinders the densification. This effect has been overcome by microdoping of the fuel with small quantities of aluminum. The process for manufacturing the fuel inevitably generates uranium-rich scraps from various sources. This residue is reincorporated into the production process in the form of U3O8 powder additions. The addition of U3O8 also hinders densification in sintering. This study was carried out to investigate the influence of both aluminum and U3O8 additives on the density of fuel pellets after sintering. As the effects of these additives are counterposed, this work studied the combined effect thereof, seeking to find an applicable composition for the production process. The experimental results demonstrated the effectiveness of aluminum, in the form of Al(OH)3, as an additive to promote increase in the densification of the (U,Gd)O2 pellets during sintering, even with high additions of U3O8 recycled from the manufacturing process.Resumo IPEN-doc 10140 Microesferas de urania-gadolinia2004 - SANTOS, L.R.; ZORZETTO, M.A.Resumo IPEN-doc 02851 Sintese de compositos ceramicos a partir de precursores naturais1996 - SANTOS, L.R.; RIELLA, H.G.Resumo IPEN-doc 12512 Studies on basic behaviour of additives during sintering of UO2- 7 'percent' Gd2O32007 - SANTOS, L.R.; RIELLA, H.G.; CARVALHO, E.F.U.