RENE RAMOS DE OLIVEIRA

RENE RAMOS DE OLIVEIRA

Página do item completo

Resultados de Busca

Agora exibindo 1 - 5 de 5

Effectiveness of modified lignin on poly(butylene adipateco-terephthalate)/poly(lactic acid) mulch film performance
2023 - BARROS, JANETTY J.P.; OLIVEIRA, RENE R.; LUNA, CARLOS B.B.; WELLEN, RENATE M.R.; MOURA, ESPERIDIANA A.B.
In this work, the biodegradable poly(butylene adipate-co-terephthalate) (PBAT)/ poly(lactic acid) (PLA) blend (ECOVIO®) and lignin, a renewable and biodegradable natural polymer with high UV absorption and modified by gamma radiation were used to produce agriculture mulch films. Lignin was gammairradiated at 30 and 60 kGy. The irradiated and non-irradiated lignin content of 2 wt% was incorporated into PBAT/PLA blend matrix using a twin-screw extruder and extrusion blown film to prepare flexible films. PBAT/PLA/LIGNIN films were characterized by Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), x-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), tensile tests, contact angle, and UV–Vis analysis. FTIR spectra showed partial miscibility between PBAT/PLA and lignin, being intensified in irradiated lignin compounds. The DSC and XRD results confirmed that the degree of crystallinity of the blends was not significantly influenced by lignin addition. FE-SEM images showed better dispersion and miscibility in PBAT/PLA/Irradiated lignin. Miscibility improvement provided by irradiated lignin promoted better mechanical properties, mainly with lignin irradiated at 60 kGy. PBAT/PLA/LIGNIN films containing 2 wt% showed excellent UV-barrier property and greater hydrophobicity. Summing up, incorporation of low contents of irradiated lignin could be an interesting alternative to produce biodegradable UV-blocking agriculture mulch films.
Production and characterization of PBAT reinforced with clay and graphene oxide nanosheets
2020 - COSTA, ROBSON S.; ARAUJO, DANIELLE G.; ANDRADE, MARCIO S. de; OLIVEIRA, RENE R.; RANGARI, VIJAYA; MOURA, ESPERIDIANA A.B.; DIAS, FRANCISCO V.
The poly (butylene adipate-co-terephthalate) (PBAT), a biodegradable polymer, is among the most promising materials to be considered as environmentally friendly high performance biodegradable plastics. However, the mechanical properties of PBAT are not the best for several applications. According to the literature, the properties of the biodegradable polymer can be improved by addition of a small amount of nanofillers, such as clay, silica, and graphene. The objective of this study is to compare the effect of the addition of Cloisite clay and graphene oxide (GO) on the properties of flexible films based on PBAT matrix. The composite films based on PBAT with addition of Cloisite (2.0 wt%) and PBAT composite films with addition of Cloisite and GO (0.1–0.2 wt%) were prepared by extrusion, using a twin-screw extruder and a flat die single extruder. The effects of the addition of Cloisite clay and graphene oxide on mechanical and thermal properties of films were evaluated by mechanical and water absorption tests, FE-SEM, XRD, and Raman analysis.
Mechanical and morphological properties of hybrid composites based on recycled LDPE/EVA blend reinforced with clay and babassu fiber residues
2020 - TAMURA, CAROLINE S.; ARANTES, MARIANA; CARMO, KARINA H.S.; SANTOS, BIANCA S.; OLIVEIRA, RENE R.; MOURA, ESPERIDIANA A.B.
Over the years the consumption of plastic products made of conventional polymers has produced a large amount of waste which has led to disposal problems worldwide. Among the alternatives to minimize these problems are reuse and recycling practices. Then, the recycling of plastic and the use of recycled materials to produce new materials reinforced with nanoparticles from natural resources can be an alternative to reduce inappropriate waste disposal. The objective of this study is to investigate the effects of the addition of clay and non-treated babassu fiber residues on the mechanical and morphological properties of composite based on recycled LDPE/EVA blend. Composite materials containing 1–3 wt% of babassu residues and 1 wt% of clay were prepared using a twin-screw extruder machine and flat die single extrusion process, in order to prepare hybrid composites sheets. The sheets prepared by recycled LDPE/EVA blend and its composites were characterized by tensile tests, XRD, and FE-SEM analysis and the correlation between properties was discussed.
Investigation on mechanical and thermal behaviours of PBAT/PLA blend reinforced with reduced graphene oxide nanosheets
2020 - BARTOLOMEI, MARCIO R.X.; CARMO, KARINA H.S.; SANTOS, BIANCA S.; BARTOLOMEI, SUELLEN S.; OLIVEIRA, RENE R.; MOURA, ESPERIDIANA A.B.
The aim of this study was to process and investigate the changes in the mechanical and morphological properties of the biodegradable nanocomposites based on polybutylene adipate-co-terephthalate (PBAT)/poly(lactic acid) (PLA) blend (PBAT/PLA blend) due to the incorporation of reduced graphene oxide (RGO) nanosheets. The biodegradable polymeric nanocomposites were prepared by melting extrusion process using a twin-screw extruder machine. The influence of the RGO nanosheets incorporation on mechanical and thermal properties of PBAT/PLA blend was investigated by tensile Thermogravimetric (TG), X-Ray diffraction (XRD), differential scanning calorimetry (DSC), and tensile test analysis. Results showed that incorporation of the small amount ofRGO(0.1wt.%) ofRGOnanosheets in the blend matrix of PBAT/PLA resulted in an important gain of mechanical properties of the blend. This result indicates that a very small amount of RGO nanosheets addition in the PBAT/PLA can lead to obtaining materials with superior properties suitable for several industrial applications.
Influence of the reduced graphene oxide incorporation on properties of acrylonitrile butadiene styrene (ABS)
2020 - SANTOS, BIANCA S.; INACIO, ANDRE L.N.; BARTOLOMEI, SUELLEN S.; SILVA, TAISE B.S.; CARMO, KARINA L.S.; OLIVEIRA, RENE R.; MOURA, ESPERIDIANA A.B.
The purpose of this study was to evaluate the influence of incorporation of the reduced graphene oxide on properties of acrylonitrile butadiene styrene (ABS). The incorporation of 0.5 and 1.5 wt% of RGO into ABS matrix was carried out by melting extrusion process using a twin-screw extruder and injection molding machine. The properties of ABS/RGO nanocomposite samples were investigated by tensile and impact Izod tests, FE-SEM, and XRD analysis. The results showed that the incorporation of small amount of RGO into ABS matrix led to obtaining of polymeric nanocomposite with superior mechanical properties when compared with original properties of ABS matrix.