JOSE ANTONIO BATISTA DE SOUZA
3 resultados
Resultados de Busca
Agora exibindo 1 - 3 de 3
Artigo IPEN-doc 23608 Preparation and characterization of hydrotalcite coatings to protect aluminium alloys2016 - FERNANDES, S.M.C.; CORREA, O.V.; SOUZA, J.A.; ANTUNES, R.A.; LIMA, N.B. de; RAMANATHAN, L.V.Pitting corrosion of the aluminium alloy cladding of spent research reactor fuels during wet storage is the main form of degradation. To prevent this, hydrotalcite (HTC) based coatings were proposed. This paper presents the effect of chemical bath parameters on the microstructure of HTC coatings and the corrosion behavior of HTC coated AA 6061 specimens. The HTC coating formed at 98 °C from nitrate baths and referred to as HT-HTC was homogeneous and consisted of intersecting blade-like crystallites. Electrochemical tests revealed that HT-HTC coated specimens that were treated in a cerium salt solution were the most resistant to corrosion. Field tests in which un-coated and HTC coated AA 6061 alloy coupons as well as full-size plates were exposed to the IEA-R1 reactor’s spent fuel basin for 23 months corroborated the high corrosion resistance imparted by the HT-HTC + Ce coating. The mechanism by which the HTC coating and cerium protect the Al alloy is discussed.Artigo IPEN-doc 22349 Corrosion behavior of hydrotalcite coated AA 6061 alloy2014 - FERNANDES, STELA M.; CORREA, OLANDIR V.; SOUZA, JOSE A.; RAMANATHAN, LALGUDI V.; ANTUNES, RENATO A.; OLIVEIRA, MARA C. dePitting corrosion of the aluminium cladding of spent research reactor (RR) fuel during wet storage is the main form of degradation and this could eventually lead to release of fissile material and contamination of storage facilities. Hence, the use of conversion coatings to protect spent Al-clad RR fuel during long term storage was proposed. Preliminary laboratory and field investigations carried out at IPEN in São Paulo, Brazil, revealed that cerium hydroxide coatings increased the corrosion resistance of Al alloys. These investigations were extended to include boehmite, hydrotalcite (HTC), cerium modified boehmite and cerium modified HTC coatings on Al alloy surfaces. This paper presents: (a) the preparation of hydrotalcite coatings from different baths followed by post-coating treatments; (b) the results of x-ray diffraction analysis and scanning electron microscopic studies of the HTC coatings; (c) the effect of HTC coating process variables such as temperature, duration of treatment and the duration of cerium modification on HTC morphology and electrochemical polarization behavior of HTC coated AA 6061 alloy in NaCl; (d) results of field tests in which uncoated and HTC coated AA 6061 coupons were exposed to the IEA-R1 reactor spent fuel basin for up to 5 months. The laboratory test specimens as well as the field test coupons coated with HTC from a high temperature bath followed by cerium modification were the most resistant to pitting.Artigo IPEN-doc 02865 Corrosao e caracterizacao microestrutural de ligas inconel 600 nacional e importada1995 - CORREA, O.V.; FERNANDES, S.M.C.; SOUZA, J.A.B.