JOSE ANTONIO BATISTA DE SOUZA
3 resultados
Resultados de Busca
Agora exibindo 1 - 3 de 3
Artigo IPEN-doc 26995 Coatings for safe long term wet storage of spent Al-clad research reactor fuels2015 - RAMANATHAN, L.V.; FERNANDES, S.M.C.; CORREA, O.V.; SOUZA, J.A. de; ANTUNES, R.A.; OLIVEIRA, M.C.L. dePitting corrosion of the aluminium cladding of spent research reactor (RR) fuels in wet storage has been observed and the use of conversion coatings to protect the cladding was proposed. A coating prepared by conventional chemical processing as opposed to electrochemical processing is the only option due to constraints related to the shape of the fuel and its high radioactivity. Hence, hydrotalcite (HTC) and boehmite were considered. This paper presents: (a) preparation of hydrotalcite (HTC) coatings from different baths followed by post-coating treatments; (b) corrosion behavior of HTC coated AA 6061 alloy; (c) results of field studies in which uncoated and HTC coated AA 6061 alloy coupons and plates, the latter assembled as a dummy fuel element, were exposed to the IEA-R1 reactor spent fuel basin for extended periods. The laboratory and field tests revealed marked improvements in the corrosion resistance of HTC coated specimens, coupons and plates. The mechanism of corrosion protection is presented.Artigo IPEN-doc 22349 Corrosion behavior of hydrotalcite coated AA 6061 alloy2014 - FERNANDES, STELA M.; CORREA, OLANDIR V.; SOUZA, JOSE A.; RAMANATHAN, LALGUDI V.; ANTUNES, RENATO A.; OLIVEIRA, MARA C. dePitting corrosion of the aluminium cladding of spent research reactor (RR) fuel during wet storage is the main form of degradation and this could eventually lead to release of fissile material and contamination of storage facilities. Hence, the use of conversion coatings to protect spent Al-clad RR fuel during long term storage was proposed. Preliminary laboratory and field investigations carried out at IPEN in São Paulo, Brazil, revealed that cerium hydroxide coatings increased the corrosion resistance of Al alloys. These investigations were extended to include boehmite, hydrotalcite (HTC), cerium modified boehmite and cerium modified HTC coatings on Al alloy surfaces. This paper presents: (a) the preparation of hydrotalcite coatings from different baths followed by post-coating treatments; (b) the results of x-ray diffraction analysis and scanning electron microscopic studies of the HTC coatings; (c) the effect of HTC coating process variables such as temperature, duration of treatment and the duration of cerium modification on HTC morphology and electrochemical polarization behavior of HTC coated AA 6061 alloy in NaCl; (d) results of field tests in which uncoated and HTC coated AA 6061 coupons were exposed to the IEA-R1 reactor spent fuel basin for up to 5 months. The laboratory test specimens as well as the field test coupons coated with HTC from a high temperature bath followed by cerium modification were the most resistant to pitting.Artigo IPEN-doc 21711 Effect of processing on microstructure and corrosion mitigating properties of hydrotalcite coatings on AA 6061 alloy2015 - FERNANDES, STELA M. de C.; CORREA, OLANDIR V.; SOUZA, JOSE A.B. de; ANTUNES, RENATO A.; LIMA, NELSON B. de; RAMANATHAN, LALGUDI V.