RAFAEL NOGUEIRA BONIFÁCIO

Projetos de Pesquisa
Unidades Organizacionais
Cargo

Filtros

20131
Limpar filtros

Configurações

Fator de Impacto: 1.500 - 2.999 × Assunto: electrodes ×

Resultados de Busca

Agora exibindo 1 - 1 de 1
  • Imagem de Miniatura
    Artigo IPEN-doc 19047
    Current density maximization in palladium-based gas diffusion electrode in proton exchange membrane fuel cell
    2013 - BONIFACIO, RAFAEL N.; OLIVEIRA NETO, ALMIR; LINARDI, MARCELO
    In this study the influence of polymeric ionomer concentration on the performance of gas diffusion electrode containing Pd/C as a substitute for usual Pt/C electrodes in PEMFC was verified. Values between 56 and 59 % of ionomer related to the mass of the catalyst layer resulted in the highest current densities. It was found that the optimum value was strongly dependent on the work potential and temperature. Current density values of 214 mA.cm-2 were obtained at 500 mV, 85 °C and 1 atm for MEAs with Pd/C on both electrodes of PEMFC. With commercial Pt/C only on the cathode side, a value of 745 mA.cm-2 was reached. For comparison, platinum anodes running under the same conditions showed only 13.9 % higher performance than palladium, indicating that improvements in the synthesis method can enhance the performance for palladium getting to be similar to platinum on the hydrogen oxidation reaction. Indeed, these results proved that, from an economic point of view, it is feasible to apply palladium on anodes to replace platinum, although an adequate assessment of durability is still to be investigated.