FERNANDA MARTINS QUEIROZ
2 resultados
Resultados de Busca
Agora exibindo 1 - 2 de 2
Artigo IPEN-doc 25934 Thermomechanical treatment and corrosion resistance correlation in the AA2198 Al–Cu–Li alloy2019 - ARAUJO, JOAO V. de S.; BUGARIN, ALINE de F.S.; DONATUS, UYIME; MACHADO, CARULINE de S.C.; QUEIROZ, FERNANDA M.; TERADA, MAYSA; ASTARITA, ANTONELLO; COSTA, ISOLDAThe influence of T3, T8 and T851 thermomechanical treatments on the microstructure and corrosion resistance of the AA2198 was investigated. Differential scanning calorimetry and scanning electron microscopy were used for microstructural characterisation, whereas electrochemical methods were employed to analyse the corrosion behaviour of the alloy. The morphology and composition of constituent particles were similar for the T3 and T8 thermomechanical treatments but varied in the T851. There was an inverse relation between T1 phase density and corrosion resistance. The T3 treatment with the highest corrosion resistance was the one with the lowest density of T1 phase. The mechanisms of corrosion varied with the thermomechanical treatments.Artigo IPEN-doc 24726 On the AA2198-T851 alloy microstructure and its correlation with localized corrosion behaviour2018 - DONATUS, UYIME; TERADA, MAYSA; OSPINA, CARLOS R.; QUEIROZ, FERNANDA M.; BUGARIN, ALINE F.S.; COSTA, ISOLDAThe corrosion behaviour of AA2198-T851 alloy has been investigated using a combination of immersion tests and different microscopy techniques. Results showed that severe localized corrosion initiated within 1 h of corrosion immersion test in 0.01 mol L−1 NaCl solution. The corrosion mechanism in this alloy is intragranular and it propagates crystallographically. The propagation occurs through grain orientation dependent bands and it can be likened to the movement of dislocation through slip planes. Corrosion rings around stable pits result from pH variations. Secondary pits form around primary pits within corrosion rings and are preceded by hydrogen evolution.