Stability of fatigued and aged ZTA compared to 3Y-TZP and Al2O3 ceramic systems
Carregando...
Data
2022
Data de publicação:
Autores IPEN
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
Journal of the Mechanical Behavior of Biomedical Materials
ODS
Resumo
To evaluate the effect of fatigue and aging on the crystalline content and reliability of a zirconia-toughened-alumina (ZTA) composite compared to its individual counterpart materials (3Y-TZP and Al2O3). Thirty-six disc-shaped specimens per group were obtained to comply with ISO 6872:2015. Crystalline content, microstructure and reliability of experimental groups were evaluated in four stages: 1) immediate; 2) aged; 3) fatigued; 4) aged + fatigue. Aging was performed in autoclave and Step-Stress-Accelerated-Life-Testing (SSALT) was performed using three stress profiles. Weibull statistics were used to determine Weibull parameters and life-expectancy. A significant increase in monoclinic phase in 3Y-TZP was observed after aging (19.31%), fatigue (17.88%) and aging + fatigue (55.81%), while ZTA evidenced minimal variation among all conditions (<5.69%). 3Y-TZP presented higher reliability than ZTA at 300 and 500 MPa, and ZTA outperformed Al2O3 at the same stress missions. None of the ceramics yielded acceptable reliability at 800 MPa. A higher characteristic strength was observed for 3Y-TZP, followed by ZTA and Al2O3. While after aging ZTA and Al2O3 remained stable, 3Y-TZP exhibited a significant increase in the characteristic stress. Aging did not affect the reliability of ZTA and Al2O3. 3Y-TZP demonstrated an increase in monoclinic content and characteristic strength after aging.
Como referenciar
BENALCAZAR JALKH, ERNESTO B.; BERGAMO, EDMARA T.P.; CAMPOS, TIAGO M.B.; ARAUJO-JUNIOR, EVERARDO N.S. de; LOPES, ADOLFO C.O.; TEBCHERANI, SERGIO M.; YAMAGUCHI, SATOSHI; GENOVA, LUIS A.; GIERTHMUEHLEN, PETRA C.; WITEK, LUKASZ; COELHO, PAULO G.; BONFANTE, ESTEVAM A. Stability of fatigued and aged ZTA compared to 3Y-TZP and Al2O3 ceramic systems. Journal of the Mechanical Behavior of Biomedical Materials, v. 135, p. 1-9, 2022. DOI: 10.1016/j.jmbbm.2022.105451. Disponível em: http://repositorio.ipen.br/handle/123456789/33438. Acesso em: 14 May 2024.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.