Manufacturing high-uranium-loaded dispersion fuel plates in Brazil
Carregando...
Data
2024
Data de publicação:
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
Annals of Nuclear Energy
Exportar
Resumo
The Nuclear and Energy Research Institute (IPEN-CNEN/SP) has developed and made available for routine production the technology for manufacturing dispersion-type fuel elements for research reactors. However, the fuel produced is limited to a uranium loading of 2.3 gU/cm3 (U3O8) or 3.0 gU/cm3 (U3Si2). To reduce Brazil’s dependence on foreign sources of Mo-99, the Brazilian government plans to construct a new research reactor, the 30 MW open pool Brazilian Multipurpose Reactor (RMB), which will mainly produce domestic Mo-99. Low-enriched uranium fuel will be used in the RMB, and increasing uranium loading will be important to increase the reactor core’s reactivity and fuel life. Uranium loadings of 3.2 gU/cm3 for the U3O8-Al and 4.8 gU/cm3 for the U3Si2-Al are considered the technological limit and have been well demonstrated worldwide. This work aimed to study the manufacturing process of these two highly uranium-loaded dispersion fuels and redefine current procedures. Additionally, UMo-Al dispersion fuel has been extensively studied globally and is likely to be the next commercially available technology. This new fuel utilizes a dispersion of UMo alloy with 7–10 wt% Mo, resulting in a uranium loading between 6 and 8 gU/cm3. We also studied this fuel type for potential use in the RMB research reactor. This work outlines the primary procedures for manufacturing these three types of fuels and the necessary adjustments to IPEN-CNEN/SP current technology. The manufacturing process proved to be well adapted to these new fuels, requiring only minor modifications. A comparison was made of the microstructures of fuel plate meat using three types of uranium compounds. The microstructures of U3Si2-Al and U10Mo-Al dispersions were found to be adequate, while that of U3O8-Al meat deviated significantly from the concept of an ideal dispersion.
Como referenciar
DURAZZO, MICHELANGELO; SOUZA, JOSE A.B.; CARVALHO, ELITA F.U. de; RESTIVO, THOMAZ A.G.; GENEZINI, FREDERICO A.; LEAL NETO, RICARDO M. Manufacturing high-uranium-loaded dispersion fuel plates in Brazil. Annals of Nuclear Energy, v. 200, p. 1-14, 2024. DOI: 10.1016/j.anucene.2024.110408. Disponível em: https://repositorio.ipen.br/handle/123456789/48009. Acesso em: 11 May 2024.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.