Characterization of sintered valve seat inserts obtained with AISI M2 high-speed steel after air quenching
Carregando...
Data
Data de publicação:
2017
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
É parte de
ABM WEEK; CONGRESSO ANUAL DA ABM, 72.; ENCONTRO NACIONAL DE ESTUDANTES DE ENGENHARIA METALURGICA, DE MATERIAIS E DE MINAS, 17.
Exportar
Resumo
The aim of this work was to heat treat and characterize sintered valve seat inserts (VSI). The powder metallurgy route was the only way found to substitute cobalt and lead, used in the VSI original alloy, due to their high cost and toxicological effect, respectively. The studied VSI was obtained with AISI M2 high-speed steel powder mixed with iron powder and other additives such as manganese sulphide, graphite, zinc stearate, carbides and copper, which was added by metallic infiltration. All the VSI were air quenched and double tempered, for one hour each, at seven different equidistantly temperatures, ranging from 100 °C up to 700 °C. The physical and mechanical properties were evaluated by means of the VSI apparent density, apparent hardness and crush radial strength. The chemical composition was determined through gas analysis, for the light elements such as carbon and sulfur, and energy dispersive X-ray fluorescence spectrometry for other elements. Microstructural characterization was performed with the support of scanning electron microscopy and energy dispersive spectroscopy. Regarding the VSI final application, the best results were achieved with the inserts air quenched and double tempered at 600 °C.
Como referenciar
GOMES, MAURILIO P.; SANTOS, IGOR P. dos; REIS, LUIS A.M. dos; COUTO, CAMILA P.; MUCSI, CRISTIANO S.; COLOSIO, MARCO A.; ROSSI, JESUALDO L. Characterization of sintered valve seat inserts obtained with AISI M2 high-speed steel after air quenching. In: ABM WEEK; CONGRESSO ANUAL DA ABM, 72.; ENCONTRO NACIONAL DE ESTUDANTES DE ENGENHARIA METALURGICA, DE MATERIAIS E DE MINAS, 17., 02-06 de outubro, 2017, São Paulo, SP. Anais... São Paulo, SP: Associação Brasileira de Metalurgia, Materiais e Mineração, 2017. p. 993-1000. Disponível em: http://repositorio.ipen.br/handle/123456789/31174. Acesso em: 11 May 2024.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.