Heat treatment of sintered valve seat inserts
Carregando...
Data
2018
Data de publicação:
Orientador
TĂtulo da Revista
ISSN da Revista
TĂtulo do Volume
Ă parte de
Ă parte de
Ă parte de
Materials Research
Resumo
The characterization of sintered valve seat inserts (VSIs) after being subjected to different heat
treatment operations has been carried out. The VSIs were obtained from three different alloys by mixing
iron powder with AISI M3:2, AISI M2 high-speed steels, and AISI D2 tool steel. After sintering, the VSI
were quenched in air followed by double tempering at seven different temperatures. The cooling rate
during air quenching was measured by means of a thermocouple type k attached to a data acquisition
system. The characterization of the mechanical and physical properties of the VSIs was achieved by
measuring relative density, apparent hardness and crush radial strength. The resulting microstructures
for the sintered parts were interpreted using the isothermal and continuous cooling transformation
diagrams for similar alloys. The VSI obtained with AISI M3:2 and AISI M2 high-speed steels after
air quenching and double tempering at 600 ÂșC showed the best results in terms of apparent hardness
and crush radial strength.
Como referenciar
GOMES, MAURILIO P.; SANTOS, IGOR P. dos; COUTO, CAMILA P.; BETINI, EVANDRO G.; REIS, LUIS A.M. dos; MUCSI, CRISTIANO S.; COLOSIO, MARCO A.; ROSSI, JESUALDO L. Heat treatment of sintered valve seat inserts. Materials Research, v. 21, n. 5, 2018. DOI: 10.1590/1980-5373-MR-2018-0068. DisponĂvel em: http://repositorio.ipen.br/handle/123456789/29307. Acesso em: 27 Apr 2024.
Esta referĂȘncia Ă© gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessĂĄrio.