SONIA REGINA HOMEM DE MELLO CASTANHO

SONIA REGINA HOMEM DE MELLO CASTANHO

(Fonte: Lattes)

ORCID

ScopusID

ResearcherID

Resumo

Graduada em Engenharia de Materiais (UFSCar, Universidade Federal de São Carlos), Mestre em Tecnologia Nuclear (IPEN/USP, Universidade de São Paulo) e Doutora em Ciências Químicas-Cerâmicos (UAM/ES -ICV/CSIC, Universidad Autónoma de Madrid, Espanha e Instituto de Ceramica y Vidrio/CSIC de Espanha). Ela é Pesquisadora Senior e atualmente Gestora Adjunta em Pesquisa e Desenvolvimento do Centro de Ciências e Tecnologia de Materiais (CCTM) do Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN-SP). É Professora da Universidade de São Paulo (USP), no programa de posgraduação Tecnologia Nuclear - Materiais. Coordenadora do grupo de pesquisas (GP/CNPq) em Materiais e Meio Ambiente. Principais áreas de atuação: - Energias Renováveis (células a combustível, catalizadores e biomassa), - Ambiental (mitigação, inertização e requalificação de efluentes e subprodutos de processos extrativistas e industriais, diretivas ambientais (RhOS, WEEE)), - Cerâmicas Biocompatíveis (vidros, compósitos multifuncionais para a implantologia). Experiência em gestão de Centro de Pesquisas, gestão ambiental, gestão de projetos, planejamento composicional de materiais, processamento coloidal, reologia, vidros e vitroceramicos, compósitos multifuncionais e nanoestruturas naturais. (Texto extraído do Currículo Lattes em 27 dez. 2021)

Página do item completo

Resultados de Busca

Agora exibindo 1 - 4 de 4

Use of waste water glass as silica supplier in synthesis of pure and Mg-doped lanthanum silicate powders for IT-SOFC application
2019 - YAMAGATA, C.; LEME, D.R.; CASTANHO, S.R.H.M.
Water glass in alkali solution (Na2SiO3/NaOH) an abundant effluent, generated in the alkaline fusion of zircon sand, represents a potential silica source to be converted in useful silica technological application. Actually, the generation of energy by environmental-friendly method is one of the major challenges for researchers. Solid Oxide Fuel Cells (SOFC) is efficient and environmentally clean technique to energy production, since it converts chemical energy into electrical power, directly. Apatite-type lanthanum silicates are promising materials for application as an electrolyte in intermediate temperature SOFC (IT-SOFC) because of their higher ionic conductivity, in temperatures of range 600–700 °C, than conventional zirconia electrolytes. In this work, pure (La9,56(SiO4)6O2,34) and Mg-doped (La9,8Si5,7Mg0,3O26,4) lanthanum silicate were synthesized, from that rich effluent. Using the sol-gel followed by precipitation method, the single crystalline apatite phase of both silicates was obtained by thermal treatment at 900 °C of their precursors. Sintered ceramic samples reached density of higher than 90%.
Micrograded ceramic-metal composites
2019 - RESTIVO, THOMAZ A.G.; BECCARI, RAFAEL F.; PADILHA, WELLINGTON R.; DURAZZO, MICHELANGELO; TELLES, VICTOR B.; COLETI, JORGE; YAMAGATA, CHIEKO; SILVA, ANTONIO C. da; SUZUKI, EDUARDO; TENORIO, JORGE A.S.; MELLO-CASTANHO, SONIA R.H.
The article shows new designed cermets and processes concerning primary to applications as thermal insulation materials with low emissivity. A new projected microstructure was obtained where dense regions (micropellets) rest inside the main porous pellet. The feature resembles a frozen hypercube, therefore such architecture is called hyper-pellet/ cermet. The processing method to obtain the hyper-cermet is based on sequential tape castings and sintering techniques. Ni-zirconia lamellae were prepared by a special mechanochemical process followed by sintering, which remain inside the main pellets as a dense region. The whole pellet is turned to be porous by employing pore-forming additives. All the constituents and porosity shapes are aligned along the disc/ flake planes. Thermal conductivity is estimated for the materials up to 800 °C by a flash diffusivimeter. Ceramographic analyses show graded density regions with directional constituents and pores. Applications of such materials are foreseen as temperature insulation materials and thermal radiation shields.
Processing, microstructure and thermoluminescence response of biomorphic yttrium oxide ceramics
2016 - SANTOS, S.C.; YAMAGATA, C.; CAMPOS, L.L.; MELLO-CASTANHO, S.R.H.
The present work reports a fast-direct bio-prototyping process using Luffa Cylindrica vegetable sponge to produce biomorphic yttrium oxide ceramics with reticulated-porous architecture and thermoluminescence response. Processing parameters as rheology of yttrium oxide suspensions, bio-template surface treatment and thermal decomposition of bio-template were investigated. Shear thinning suspensions of 30 vol% yttrium oxide with apparent viscosity of 243mPa.s provided a successful impregnation of samples, whereby bio-templates with smooth ceramic layer and hierarchical reticulated architecture were formed. By thermal treatment at 1600 degrees C for 2 h biomorphic yttrium oxide ceramics with porous microstructure and TL response at 150 degrees C and lambda=550 nm were produced. The proposed fast direct bio-prototyping process is suitable for the production of ceramic components with complex shape and demonstrates potential for general applicability to any bio-template. (C) 2016 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
Bio-prototyping and thermoluminescence response of cellular rare earth ceramics
2016 - SANTOS, S.C.; YAMAGATA, C.; CAMPOS, L.L.; MELLO CASTANHO, S.R.H.
The use of renewable materials is essential toward green economy. Vegetable structures are abundant, exhibit complex hierarchically built shape and an architecture that is promising to form functional materials. In this work using a mixture of rare earth oxides, which contain around 57 wt% yttrium oxide, cellular ceramics by bio-prototyping from the vegetable sponge Luffa cylindrica were produced and the thermoluminescence response was evaluated. By colloidal processing aqueous suspensions with 25 vol% solids content, pH 10, 1 wt% deffloculant and 0.2 wt% binder exhibited shear thinning behavior and apparent viscosity suitable for replica method. By thermal treatment at 1600 ◦C for 2 h in air biomorphic rare earth ceramics with dense microstructure and reticulated architecture were produced.