JOAO VICTOR DE SOUSA ARAUJO

JOAO VICTOR DE SOUSA ARAUJO

Página do item completo

Resultados de Busca

Agora exibindo 1 - 4 de 4

Effect of galvanic coupling on the corrosion susceptibility of friction stir weldment of AA2198-T851 alloy
2018 - COSTA, I.; DONATUS, U.; MILAGRE, M.X.; MACHADO, C.S.C.; ARAUJO, J.V.S.
The AA2198-T851 alloy is a new generation Al-Li alloy which finds application in the aerospace industry. Its preference over conventional Al alloys is premised on the fact that it exhibits better strength to weight ratio and improved fatigue resistance due to the addition of Li as a major alloying element. However, it is a relatively new alloy and its processing-structure-property-performance relationship is far from being established. This is very true for the relationship between its structure and corrosion resistance which is very scarce in the literature. Our recent findings have revealed that this alloy is highly susceptible to severe localized corrosion which is caused by the abundance of active hexagonal T1 (Al2CuLi) particles in its microstructure. The corrosion susceptibility is further promoted by the non-uniform precipitation of these particles which are often preferentially concentrated in bands aligned parallel to the {111}Al. Furthermore, bulk zonal heterogenities with pronounced non-uniform distribution of the active T1 particles are created when this alloy is welded using friction stir welding. The friction stir welding process is a solid state welding process that has been adjudged to be the best welding technique for Al alloys. Nonetheless, this process generates different zones in the weldments of Al alloys. Thus, zones exhibiting different electrochemical characteristics and severe galvanic interactions can occur when the weldment is exposed to a corrosive media. The galvanic interactions can lead to a faster propagation of attack in the most susceptible region of the weldment, which in this case is the parent material (with the highest volume fraction of the T1 particles). To establish this, the galvanic interactions between the zones of the weldment have been investigated by separately exposing the parent material and the stir zone of the weld and then by exposing the entire weldment using NaCl and EXCO solutions. Optical, scanning electron and transmission electron microscopes were also employed in the study. The results revealed that the parent material of the weldment was the most susceptible (as previously mentioned) and appeared to corrode at a faster rate when coupled to the more cathodic stir zone, thermomechanically affected zone and the heat affected zones of the weldment (with lower volume fraction of the T1 particles). The modes of corrosion in the zones of the weld were also observed to be different. However, the most susceptible region corroded intragranularly with the grain boundaries exhibiting more noble electrochemical characteristics.
Efeito dos tratamentos termomecânicos T8 e T851 na susceptibilidade a exfoliação e corrosão intergranular da liga AA2198
2018 - ARAUJO, J.V.S.; MACHADO, C.S.C.; MILAGRE, M.X.; COSTA, I.; FERREIRA, R.O.; VIVEIROS, B.G. de
As ligas Al-Cu-Li são ligas avançadas de grande interesse para a indústria aeronáutica devido à baixa densidade e alta resistência mecânica destas. Apesar destas vantages, estas apresentam susceptibilidade a diferentes tipos de corrosão. Além disso, os tratamentos termomecânicos aos quais são submetidas durante o processo de fabricação, afetam a microestrutura destas ligas bem como a resistência à corrosão destas. Existem alguns trabalhos publicados sobre a resistência à corrosão destas ligas, porém nestes trabalhos não se faz um comparação entre os efeitos dos diferentes tratamentos termomecânicos. Neste estudo foi investigado os efeitos dos tratamentos termomecânicos T8 e T851 na susceptibilidade à corrosão por exfoliação e corrosão intergranular (IGC) da liga AA2198, segundo as normas ASTM G34 e ASTM G110, respectivamente. Os resultados mostraram significativas diferenças na microestrutura das duas condições, com liga submetida ao tratamento T8 apresentando grãos alongados enquanto a exposta ao tratamento T851, grãos equaxiais. Ambas as ligas apresentaram suscetibilidade a exfoliação. Entreanto, enquanto a liga T8 apresentou susceptibilidade à corrosão intergranular e intragranular, a liga T851 não foi suscetível à corrosão intergranular, apresentando ataque de corrosão dentro dos grãos, ou seja, corrosão intragranular.
Comparação da resistência a corrosão localizada de ligas de alumínio pela técnica de varredura com eletrodo vibratório (SVET)
2018 - MILAGRE, M.X.; ARAUJO, J.S.; MACHADO, C.S.C.; DONATUS, U.; COSTA, I.
As ligas Alumínio-Cobre-Lítio (Al-Cu-Li) foram desenvolvidas como substitutas para as ligas convencionais de Al-Cu. Apesar de apresentarem melhor módulo específico também são suscetíveis à corrosão localizada. As técnicas eletroquímicas convencionais são ferramentas úteis para entender o comportamento de corrosão das ligas de Al, no entanto elas dão uma resposta global dos fenômenos de corrosão. Neste trabalho, a técnica de varredura com eletrodo vibratório (SVET) foi utilizada para comparar os mecanismos de corrosão de algumas ligas de Al. Os ensaios com SVET foram realizados em solução de NaCl 0,005 mol L-1 durante 24 h e os mapas foram obtidos a cada 2 h para as ligas AA2024-T3, AA2098-T351 e AA2198-T851. Os resultados mostraram diferentes mecanismos para cada liga sendo que as ligas Al- Cu-Li maiores densidades de corrente associadas a corrosão severa localizada em relação a liga AA2024-T3.
EIS study of the microstructure influence on the corrosion behaviour of AA 2198-T3 compared to AA 2198-T851 alloy
2016 - ARAUJO, J.V. de S.; QUEIROZ, F.M.; TERADA, M.; ASTARITA, A.; COSTA, I.
This paper deals with the study of the influence of the temper state on the electrochemical behavior of an high strength aluminum-lithium alloy. In particular the corrosion resistance of the AA2198 alloy in both T3 and T851 temper condition, has been evaluated by immersion tests as a function of immersion time in NaCl 0.01 mol.L-1. The evolution of the electrochemical behavior was monitored by electrochemical impedance spectroscopy (EIS) and surface observation by optical microscopy and Field Emission Gun- Scanning Electron Microscopy. The results indicated a higher electrochemical activity associated to the T851 treatment comparatively to the T3 one and this was ascribed to the more heterogeneous microstructure related to the first treatment. Severe localized corrosion was seen on the AA2198-T851 alloy after only few hours of exposure to the test medium. This type of corrosion was of the crystallographic type and was related to T1 (Al2LiCu) which is more electrochemically active than the matrix leading to localized attack. Pitting attack was seen on the AA2198-T3 alloy along the surface and it was located at the matrix-precipitates interface. The EIS results supported a faster kinetics and lower impedances associated to the AA2198-T851 comparatively to the AA2198-T3 alloy according to the surface observation along the test period.