LUIS ANTONIO GENOVA

LUIS ANTONIO GENOVA

(Fonte: Lattes)

Resumo

Graduate at Materials Engineering from Universidade Federal de São Carlos (1984), working for six years in ceramic industries. Master's and Ph.D. at Nuclear Engineering from Universidade de São Paulo. Has experience in Material Engineering, focusing on Ceramics, acting on the following subjects: processing, sintering, ceramic microsphere, porous ceramic, ceramic machining, adsorption, photocatalisys. (Text obtained from the Currículo Lattes on November 12th 2021)

Possui graduação em Engenharia de Materiais pela Universidade Federal de São Carlos (1984), com atuação por seis anos em indústrias cerâmicas. Possui mestrado e doutorado pela Universidade de São Paulo (2003). Atualmente é tecnologista senior do Instituto de Pesquisas Energéticas e Nucleares. Tem experiência na área de Engenharia de Materiais, com ênfase em Cerâmicos, atuando principalmente nos seguintes temas: processamento, sinterização, microesferas cerâmicas, cerâmicas porosas, usinagem cerâmica, adsorção, fotocatálise. (Texto extraído do Currículo Lattes em 12 nov. 2021)

Página do item completo

Resultados de Busca

Agora exibindo 1 - 3 de 3

Stability of fatigued and aged ZTA compared to 3Y-TZP and Al2O3 ceramic systems
2022 - BENALCAZAR JALKH, ERNESTO B.; BERGAMO, EDMARA T.P.; CAMPOS, TIAGO M.B.; ARAUJO-JUNIOR, EVERARDO N.S. de; LOPES, ADOLFO C.O.; TEBCHERANI, SERGIO M.; YAMAGUCHI, SATOSHI; GENOVA, LUIS A.; GIERTHMUEHLEN, PETRA C.; WITEK, LUKASZ; COELHO, PAULO G.; BONFANTE, ESTEVAM A.
To evaluate the effect of fatigue and aging on the crystalline content and reliability of a zirconia-toughened-alumina (ZTA) composite compared to its individual counterpart materials (3Y-TZP and Al2O3). Thirty-six disc-shaped specimens per group were obtained to comply with ISO 6872:2015. Crystalline content, microstructure and reliability of experimental groups were evaluated in four stages: 1) immediate; 2) aged; 3) fatigued; 4) aged + fatigue. Aging was performed in autoclave and Step-Stress-Accelerated-Life-Testing (SSALT) was performed using three stress profiles. Weibull statistics were used to determine Weibull parameters and life-expectancy. A significant increase in monoclinic phase in 3Y-TZP was observed after aging (19.31%), fatigue (17.88%) and aging + fatigue (55.81%), while ZTA evidenced minimal variation among all conditions (<5.69%). 3Y-TZP presented higher reliability than ZTA at 300 and 500 MPa, and ZTA outperformed Al2O3 at the same stress missions. None of the ceramics yielded acceptable reliability at 800 MPa. A higher characteristic strength was observed for 3Y-TZP, followed by ZTA and Al2O3. While after aging ZTA and Al2O3 remained stable, 3Y-TZP exhibited a significant increase in the characteristic stress. Aging did not affect the reliability of ZTA and Al2O3. 3Y-TZP demonstrated an increase in monoclinic content and characteristic strength after aging.
Nanoscale physico-mechanical properties of an aging resistant ZTA composite
2021 - BENALCAZAR JALKH, E.B.; COELHO, P.G.; WITEK, L.; BERGAMO, E.T.P.; LOPES, A.C.O.; MONTEIRO, K.N.; CESAR, P.F.; GENOVA, L.A.; LISBOA-FILHO, P.N.; ABREU, J.L.B.; CAMPOS, T.M.B.; CANTEENWALA, A.; BONFANTE, E.A.
Objective: To characterize the effects of aging on the nanomechanical properties and 3D surface topographical parameters of an experimental Zirconia Toughened Alumina (ZTA) composite compared to its respective individual counterpart materials. Methods: Disk-shaped specimens comprised of three material groups were processed: 1) ZTA 70/30 (70% alumina reinforced with 30% second-generation 3Y-TZP); 2) Zpex (Second-generation 3Y-TZP), and; 3) Al2O3 (High purity Alumina) (n = 10/material, 12 × 1 mm). After synthesis, ceramic powders were pressed, the green-body samples were sintered and polished. Nanoindentation testing was performed to record elastic modulus (E) and hardness (H). Interferometry was utilized to assess 3D surface roughness parameters (Sa, Sq), while X-ray diffraction (XRD) and scanning electron microscope (SEM) assessed the crystalline content and microstructure. All tests were performed before and after simulated aging (134°C, 2.2 bar, 20 h). Statistical analyses were performed using linear mixed-model and least square difference pos-hoc tests (α = 5%). Results: XRD spectra indicated increase of monoclinic peaks for Zpex (~18%) relative to ZTA 70/30 (~2.5%) after aging. Additionally, aging did not affect the surface roughness parameters of ZTA 70/30 and Al2O3, although a significant increase in Sa was recorded for Zpex following aging (~90 nm) (p < 0.001). Al2O3 yielded the highest H and E values (H:21 GPa, E: 254 GPa), followed by ZTA 70/30 (H: 13 GPa, E: 214 GPa) and Zpex (H:11 GPa, E: 167 GPa), all significantly different (p < 0.03). Conclusion: ZTA 70/30 and Al2O3 presented high hydrothermal stability with respect to all evaluated variables, where artificial aging significantly increased the monoclinic content and surface roughness of Zpex.
Alumina-toughened zirconia for dental applications
2021 - BERGAMO, EDMARA T.P.; CARDOSO, KARINA B.; LINO, LUCAS F.O.; CAMPOS, TIAGO M.B.; MONTEIRO, KELLI N.; CESAR, PAULO F.; GENOVA, LUIS A.; THIM, GILMAR P.; COELHO, PAULO G.; BONFANTE, ESTEVAM A.
To characterize the physicomechanical properties of an alumina-toughened zirconia (ATZ). ATZ synthesis consisted of the addition of alumina particles in an yttria-stabilized tetragonal zirconia polycrystals (3Y-TZP) matrix. Specimens were obtained by uniaxial and isostatic pressing ATZ and 3Y-TZP powders and sintering at 1600°C/1 h and 1550°C/1 h, respectively. Crystalline content and residual stress were evaluated using X-ray diffraction (XRD). Microstructure was characterized by scanning electron microscopy (SEM). Optical properties were determined by reflectance test. Mechanical properties were assessed by biaxial flexural strength test. All analyses were performed before and after aging (134°C, 20 h, 2 bar). XRD and SEM revealed a typical ATZ and 3Y-TZP crystalline content, chiefly tetragonal phase, with a dense polycrystalline matrix, though a smaller grain size for ATZ. Aging triggered a similar monoclinic transformation for both systems; however, ATZ exhibited higher residual compressive stresses than 3Y-TZP. While as-processed 3Y-TZP demonstrated significantly higher characteristic strength relative to ATZ, no significant difference was observed after aging (~215 MPa increase in the ATZ strength). ATZ presented significantly higher opacity relative to 3Y-TZP, although aging significantly increased the translucency of both systems (increase difference significantly higher in the 3Y-TZP compared to ATZ). ATZ physicomechanical properties support its applicability in the dental field, with a lower detrimental effect of aging relative to 3Y-TZP.