Styrene grafted onto polypropylene and polytetrafluoroethylene films

Carregando...
Imagem de Miniatura
Data
Data de publicação:
2008
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
É parte de
ENCONTRO ANUAL DA SOCIEDADE BRASILEIRA DE PESQUISA EM MATERIAIS, 7.
Exportar
Mendeley
Projetos de Pesquisa
Unidades Organizacionais
Fascículo
Resumo
The objective of this work is to present results of radiation-induced grafting polymerization of styrene onto polypropylene (PP) films with 0.04 mm thickness and polytetrafluoroethylene (PTFE) films with 0.2 mm thickness. Both films were processed in the same method. The films were placed in a glass tube in contact with styrene monomer/toluene (1:1, v/v) solution and nitrogen was bubbled to guarantee inert atmosphere. The films were irradiated at 20, 40, 80 and 100 kGy doses at room temperature in cobalt–60 source. After irradiation process the samples were kept in the solution and at room temperature to 7, 14, 21 and 28 days in order to evaluate the grafting behavior. Another aspect studied was the effect of radiation dose on the grafting yield. The samples were characterized by Thermogravimetry Analysis (TGA), Differential Scanning Calorimetry (DSC) and Infrared Spectroscopy (FTIR). The degree of grafting (DOG) was calculated gravimetrically. The DOG results revealed that after 21 days at 100 kGy is achieved the higher grafting in the films (table 1). By TG is verified that PTFE grafted exhibit two steps of degradation and the PP grafted only one step of degradation.

Como referenciar
FERREIRA, H.P.; SOUZA, C.P. de; ZEN, H.A.; GERALDES, A.N.; RIBEIRO, G.; PARRA, D.F.; LUGAO, A.B. Styrene grafted onto polypropylene and polytetrafluoroethylene films. In: ENCONTRO ANUAL DA SOCIEDADE BRASILEIRA DE PESQUISA EM MATERIAIS, 7., 28 de setembro - 2 de outubro, 2008, Guaruja, SP. Resumo... Disponível em: http://repositorio.ipen.br/handle/123456789/22923. Acesso em: 19 Feb 2025.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.

Agência de fomento