Study of the thermal diffusivity variation in thin duplex steel plates welded by GTAW process
Carregando...
Data
Data de publicação:
2016
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
É parte de
CONGRESSO BRASILEIRO DE ENGENHARIA E CIENCIA DOS MATERIAIS, 22.
Exportar
Resumo
This study describes the experimental efforts in recording 2-dimensional temperature distribution in thin plates autogenous UNS S32304 steel during welding. The butt-welded autogenous joints were experimentally performed by the GTAW (Gas Tungsten Arc Welding) process with either argon or argon-2%nitrogen atmospheres. The increase of nitrogen mass in the heat affected regions after welding was measured suggesting a correlation with the change in the thermal diffusivity of the material. The laser flash method (LFM) was also used to determine the thermal diffusivity of the material in the thickness direction. The cooling rates of the temperature cycles were recorded by thermocouples embedded by spot welding on surfaces of the plate and connected to an acquisition multichannel data system. The temperature curves suggest a relationship between the microstructures in the solidified and the heat affected zone with the diffusivity variation. These measurements define key parameters regards the residual stress study after welded process.
Como referenciar
BETINI, E.G.; ROSSI, J.L.; MUCSI, C.S.; GOMES, M.P.; ORLANDO, M.T.; LUZ, T.S. Study of the thermal diffusivity variation in thin duplex steel plates welded by GTAW process. In: CONGRESSO BRASILEIRO DE ENGENHARIA E CIENCIA DOS MATERIAIS, 22., 06-10 de novembro, 2016, Natal, RN. Abstract... p. 7614. Disponível em: http://repositorio.ipen.br/handle/123456789/27285. Acesso em: 04 May 2024.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.