On the effects of hydrothermal treatments on the corrosion resistance of the TSA anodized AA7475-T761 alloy
Carregando...
Data
Data de publicação:
2016
Autores IPEN
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
É parte de
INTERNATIONAL ALUMINIUM CONFERENCE, 13th
Exportar
Resumo
The effect of hydrothermal treatment time on the sealing and corrosion resistance of the anodized AA7475-T761 aluminium alloy has been investigated in this study. The treatments tested are environmental compatible and has not chromium ions involved. Anodizing was carried out by tartaric-sulphuric anodizing (TSA) and this was followed by hydrothermal treatments for partial sealing, either with or without propyleneglycol (PRG) and/or cerium ions. Four different treatment times were tested, specifically, 2.5, 5.0, 7.5 and 10 min. The corrosion resistance of the treated samples was evaluated by Electrochemical Impedance Spectroscopy (EIS) and the anodic layers formed by anodizing and hydrothermal treatments were characterized by Scanning Electron Microscopy (SEM). The EIS results indicated that the best corrosion resistance was related to the treatments that combined hydrothermal treatments in boiling water with PRG for 10 minutes or boiling water with PRG and cerium ions for 5 min. The SEM images for the samples showed the formation of a homogeneous anodic layer and the thickness is approximately 3 m. It was noticed that the porosities were not completed sealed by the treatments tested and this was on purpose in order to allow coating adhesion to the anodic layer.
Como referenciar
ALMEIDA, THALLIS L.; QUEIROZ, FERNANDA M.; TERADA, MAYSA; COSTA, ISOLDA; CAPELOSSI, VERA R. On the effects of hydrothermal treatments on the corrosion resistance of the TSA anodized AA7475-T761 alloy. In: INTERNATIONAL ALUMINIUM CONFERENCE, 13th, September 21-23, 2016, Naples, Italy. Proceedings... Disponível em: http://repositorio.ipen.br/handle/123456789/27318. Acesso em: 19 Feb 2025.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.