Study of the mechanical and metallurgical properties of sintered steels for valve seat inserts application
Carregando...
Data
Data de publicação:
2016
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
É parte de
ENCONTRO CIENTÍFICO DE FÍSICA APLICADA, 7.
Exportar
Resumo
The aim of this work was to study the valve seat insert (VSI) produced with three different alloys (mainly modified from the original AISI M3/2, M2 and D2 high-speed steels) from the mechanical and metallurgical point of view. These alloys modifications were intended as an alternative to replace cobalt and lead used in the original alloy due to their high cost and toxicological effect respectively. Such alloys have been developed for internal combustion engines VSI manufacture. The VSI studied in this work was previously produced by the powder metallurgy (P/M) route. The VSI production was performed using a uniaxial hydraulic press and a belt conveyor furnace. The VSI was submitted to metallic infiltration during the sintering process using copper as filler. The studies were performed according to standardized apparent density (ASTM C 373-88), apparent hardness (ASTM E 92-82) and radial crush strength (MPIF Standard 35) tests. The VSI produced with M3/2 alloy proved to be more advantageous considering the highest values obtained in the apparent hardness and radial crush strength tests.
Como referenciar
GOMES, M.P.; SANTOS, I.P.; MUCSI, C.S.; COLOSIO, M.A.; ROSSI, J.L. Study of the mechanical and metallurgical properties of sintered steels for valve seat inserts application. In: ENCONTRO CIENTÍFICO DE FÍSICA APLICADA, 7., 11-13 de maio, 2016, Serra, ES. Proceedings... p. 59-61. Disponível em: http://repositorio.ipen.br/handle/123456789/27574. Acesso em: 08 May 2024.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.