Evaluation of the Poly (Lactic Acid) and calcium carbonate effects on the mechanical and morphological properties in PBAT blends and composites
Carregando...
Data
2017
Data de publicação:
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
International Journal of Innovative Science, Engineering & Technology
Exportar
Resumo
In this study, the effect of the organic (poly(lactic acid)) and the
inorganic (calcium carbonate (CaCOR3R)) fillers were evaluated in
mechanical, thermal, morphological and surface properties of the
poly(butylene adipate-co-terephthalate) (PBAT) matrix.
Mechanical results showed that the fillers has an influence on the
PBAT matrix. The use of CaCOR3R showed higher elongation at
break than PLA. However, the blends showed higher elastic
modulus, resulting in greater stiffness to the PBAT matrix. Both
fillers thermally destabilized the matrix. The morphological
properties showed a uniform dispersion of the fillers in the
composites and blends, however it is weaker with PLA. Because
the PBAT matrix surface is, intrinsically, hydrophobic, the
composites presented a smaller degree of hydrophobicity, while
the PLA makes the blends hydrophilic.
Como referenciar
NUNES, EDILENE de C.D.; SOUZA, ALANA G. de; COIADO, RENATA D.S.; MOURA, ESPERIDIANA A.B.; ROSA, DERVAL dos S. Evaluation of the Poly (Lactic Acid) and calcium carbonate effects on the mechanical and morphological properties in PBAT blends and composites. International Journal of Innovative Science, Engineering & Technology, v. 4, n. 6, p. 313-318, 2017. Disponível em: http://repositorio.ipen.br/handle/123456789/27693. Acesso em: 19 Apr 2024.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.