Simulation of accident-tolerant U3Si2 fuel using FRAPCON code
Carregando...
Data
Data de publicação:
2017
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
É parte de
INTERNATIONAL NUCLEAR ATLANTIC CONFERENCE
Exportar
Resumo
The research on accident-tolerant fuels (ATFs) increased after the Fukushima event. This benefitted risk management in nuclear operations. In this investigation, the physical properties of the materials being developed for the ATF program were compared with those of the standard UO2–Zr fuel system. The research efforts in innovative fuel design include rigorous characterization of thermal, mechanical, and chemical assessment, with the objectives of making the burnup cycle longer, increasing power density, and improving safety performance. Fuels must reach a high uranium density—above that supported by UO2—and possess coating that exhibits better oxidation resistance than Zircaloy. The uranium density and thermal conductivity of ATFs, such as U3Si2, UN, and UC, is higher than that of UO2; their combination with advanced cladding provides possible fuel–cladding options. An ideal combination of fuel and cladding must increase fuel performance in loss-of-coolant scenarios. The disadvantages of U3Si2, UN, and UC are their swelling rates, which are higher than that of UO2. The thermal conductivities of ATFs are approximately four times higher than that of UO2. To prevent the generation of hydrogen due to oxidation of zirconium-based alloys in contact with steam, cladding options, such as ferritic alloys, were studied. It was verified that FeCrAl alloys and SiC provide better response under severe conditions because of their thermophysical properties. The findings of this study indicate that U3Si2 and the FeCrAl fuel cladding concept should replace UO2–Zr as the fuel system of choice.
Como referenciar
GOMES, DANIEL S.; SILVA, ANTONIO T.; ABE, ALFREDO Y.; MUNIZ, RAFAEL O.R.; GIOVEDI, CLAUDIA. Simulation of accident-tolerant U3Si2 fuel using FRAPCON code. In: INTERNATIONAL NUCLEAR ATLANTIC CONFERENCE, October 22-27, 2017, Belo Horizonte, MG. Proceedings... Rio de Janeiro, RJ: Associação Brasileira de Energia Nuclear, 2017. Disponível em: http://repositorio.ipen.br/handle/123456789/28188. Acesso em: 19 Apr 2024.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Assuntos
accident-tolerant nuclear fuels; aluminium alloys; chromium alloys; cladding; comparative evaluations; computerized simulation; f codes; fuel rods; iron alloys; loss of coolant; steady-state conditions; swelling; thermal conductivity; thermal expansion; transients; uranium carbides; uranium nitrides; uranium silicides; zircaloy