P/M valve seat inserts: air quenching and characterization

GOMES, MAURILIO P.; SANTOS, IGOR; COUTO, CAMILA; MUCSI, CRISTIANO; ROSSI, JESUALDO L.; COLOSIO, MARCO

P/M valve seat inserts: air quenching and characterization

Download

Data

2017

Autores IPEN

IGOR PASSOS DOS SANTOS

JESUALDO LUIZ ROSSI

CRISTIANO STEFANO MUCSI

CAMILA PUCCI COUTO

MAURILIO PEREIRA GOMES

É parte de

SAE Technical Paper

Exportar

Resumo

This work consists of evaluating the influence of heat treatment on sintered valve seat insert (VSI) obtained with two different highspeed steels powders and one tool steel: AISI M3:2, AISI M2 and AISI D2, respectively. The high-speed / tool steel powders were mixed with iron powders and additives such as manganese sulphide, zinc stearate, graphite and niobium carbide. All the high-speed / tool steel powders had its particle size distribution and morphology analyzed. The heat treatment of the VSI consisted of air quenching followed by double tempering it in seven different and equidistant temperatures, ranging from 100 °C until 700 °C. A data acquisition system with a thermocouple type k attached to the samples was used to determine the air-quenching cooling rate. The mechanical and physical properties measurements were carried out, i.e., apparent density, apparent hardness and crush radial strength. The microstructural evaluation consisted of etching the VSI and then analyzing it using scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The results showed that the VSI obtained with the AISI M3:2 and M2 high-speed steel powders mixtures showed the best results regarding its apparent hardness and crush radial strength after air quenching and double tempering it at 600 °C.

Como referenciar

GOMES, MAURILIO P.; SANTOS, IGOR; COUTO, CAMILA; MUCSI, CRISTIANO; ROSSI, JESUALDO L.; COLOSIO, MARCO. P/M valve seat inserts: air quenching and characterization. SAE Technical Paper, n. 2017-01-5014, 2017. DOI: 10.4271/2017-01-5014. Disponível em: http://repositorio.ipen.br/handle/123456789/29231. Acesso em: 26 Apr 2024.

Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.