Influence of thickness on magnetic and microstructural properties in electrical steels semi-processed of low efficiency
Carregando...
Data
2018
Data de publicação:
Autores IPEN
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
Materials Science Forum
Resumo
In this study, a steel for semiprocessed electrical purposes of non-oriented grain with
approximately 0.05% carbon content and 0.02% silicon content was evaluated. Lamellas with kind
of thicknesses 0.58 mm, 0,66 mm and 0.87 mm were processed on an industrial scale with a strain
rate in the hardening lamination between 3 and 5%. The magnetic properties were evaluated after
the wet heat treatment. The loss separation method was applied, estimating the hysteretic plot with
hysteresis measure in the quasi static condition and the parasitic losses calculated according to
Thomson's Equation. By increasing grain size, permeability increases and coercivity decreases.
However, in the case of losses, there is an optimum grain size. After the procedure of separation of
losses, it was observed that increase of thickness results in increase of the anomalous parcel of
magnetic losses.
Como referenciar
TRINDADE, M.A.; CAMPOS, M.F. de; LANDGRAF, F.J.G.; LIMA, N.B.; ALMEIDA, A. Influence of thickness on magnetic and microstructural properties in electrical steels semi-processed of low efficiency. Materials Science Forum, v. 930, p. 466-471, 2018. DOI: 10.4028/www.scientific.net/MSF.930.466. Disponível em: http://repositorio.ipen.br/handle/123456789/29478. Acesso em: 26 Apr 2024.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.