A new double-line waveguide architecture for photonic applications using fs laser writing in Nd3+ doped GeO2-PbO glasses
Carregando...
Data
2022
Data de publicação:
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
Optical Materials
Exportar
Resumo
A new double-line waveguide architecture produced in Nd3+ doped GeO2-PbO glasses is presented for photonic applications. The waveguides are written directly into Nd3+ doped GeO2-PbO glasses using a Ti:Sapphire femtosecond (fs) laser, operating at 800 nm, delivering 30 fs pulses at 10 kHz repetition rate and writing speed of 0.5 mm/s. Two parallel lines form a dual-waveguide each line being a result of either 4 or 8 superimposed lines. Results of propagation losses, M2 beam quality factor at 632 and 1064 nm, refractive index change, and relative gain at the signal wavelength (1064 nm) are presented. Structural changes, due to laser writing process were investigated by Raman spectroscopy. The observed near-field pattern image showed good waveguiding quality, consisting of a single, circular lobe. X,y-symmetrical guiding for both waveguides was observed. The relative gain reached 4.5 and 6.0 dB/cm for 4 and 8 superimposed lines, respectively, for 420 mW of 808 nm pumping. Propagation losses were 0.89 and 0.44 dB/cm, for 4 and 8 superimposed lines, respectively, leading to positive internal gain of 3.6 and 5.56 dB/cm. The results obtained in the present work demonstrate that this new double line architecture for Nd3+ doped GeO2-PbO glasses is promising for the fabrication of integrated amplifiers, lossless components and lasers.
Como referenciar
BORDON, CAMILA D.S.; DIPOLD, JESSICA; FREITAS, ANDERSON Z.; WETTER, NIKLAUS U.; ROSSI, WAGNER de; KASSAB, LUCIANA R.P. A new double-line waveguide architecture for photonic applications using fs laser writing in Nd3+ doped GeO2-PbO glasses. Optical Materials, v. 129, p. 1-6, 2022. DOI: 10.1016/j.optmat.2022.112495. Disponível em: http://repositorio.ipen.br/handle/123456789/33199. Acesso em: 26 Apr 2024.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.