Development of stabilized zirconia–alkali salts dual membranes for carbon dioxide capture
Carregando...
Data
2023
Data de publicação:
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
International Journal of Applied Ceramic Technology
ODS
Exportar
Resumo
Molten Na2CO3–K2CO3 (NKC, 56–44 mol%) eutectic compositions were vacuum-impregnated, at the eutectic temperature, into two porous ZrO2:8.6 mol% MgO (magnesium-partially stabilized zirconia, MgPSZ) and ZrO2:8 mol% Y2O2 (yttria-fully stabilized zirconia, 8YSZ) ceramics. Thermogravimetric analyses were performed in mixtures of that composition with MgPSZ and 8YSZ ceramic powders. Before impregnation, porosity was achieved in the two compounds by addition and thermal removal of 30 vol.% NKC. To ascertain the carbonates had filled up through the ceramic body, both sides of the parallel and fracture surfaces of the disk-shaped impregnated compositions were observed in a scanning electron microscope and analyzed by energy-dispersive X-ray spectroscopy. The electrical conductivity of the two ceramics, before and after impregnation, was evaluated by electrochemical impedance spectroscopy in the 5 Hz–13 MHz frequency range from approximately 530 to 740°C. The permeation of the carbonate ions through the membranes via the eutectic composition was assessed by the threshold temperatures of the onset of the carbonate ion percolation. The objectives were to prepare dual-phase membranes for the separation of carbon dioxide and for the development of carbon dioxide sensors.
Como referenciar
MUCCILLO, REGINALDO; CARVALHO, SABRINA G.M.; DENALDI, RAFAEL L.; MUCCILLO, ELIANA N.S. Development of stabilized zirconia–alkali salts dual membranes for carbon dioxide capture. International Journal of Applied Ceramic Technology, v. 20, n. 2, p. 951-958, 2023. DOI: 10.1111/ijac.14290. Disponível em: http://repositorio.ipen.br/handle/123456789/33837. Acesso em: 26 Apr 2024.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.