Tribological evaluation of an optical fiber laser marked stainless steel for biomedical applications
Carregando...
Data
Data de publicação
2018
Autores IPEN
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
É parte de
CONGRESSO BRASILEIRO DE ENGENHARIA BIOMEDICA, 26.
Exportar
Resumo
The effect of laser marking process on the tribological behaviour of ISO 5832-1 austenitic stainless steel (SS) on the
friction coefficient and wear volume using ball-cratering wear tests was evaluated in this work. The laser marking
process was carried out with a nanosecond optical fiber ytterbium laser at four different pulse frequencies. For
comparison reasons, surfaces without laser treatments were also evaluated. A phosphate buffer solution (PBS) was used
as lubricant. The wear tests were carried out during 10 min with PBS drip, solid spheres of AISI 316L SS with 1 inch in
diameter and of 52-100 chrome steel, with 2 mm in diameter, were used as counter-bodies. The results indicated that the
tribological behaviour is influenced by the laser marking process parameters used, and the wear rate is dependent of the
normal force and the type of sphere.
Como referenciar
PIERETTI, EURICO F.; ANTUNES, RENATO A.; NEVES, MAURICIO D.M. das. Tribological evaluation of an optical fiber laser marked stainless steel for biomedical applications. In: CONGRESSO BRASILEIRO DE ENGENHARIA BIOMEDICA, 26., 21-25 de outubro, 2018, Búzios, RJ. Anais... p. 1-6. Disponível em: http://200.136.52.105/handle/123456789/31766. Acesso em: 30 Dec 2025.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.