Tempering effect in ceramics chemical analysis by INAA
Carregando...
Data
Data de publicação:
2008
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
É parte de
INTERNATIONAL CONFERENCE ON ART, 9th
Exportar
Resumo
Archaeological ceramics are manufactured with clay and usually potters added a material named temper that
can be a mineral or organic material. Temper modifies the chemical and physical properties of clay and
improves its workability. When INAA is used, the analysis reflects total composition, i.e., the elements in the clay
as well the ones in the tempering. In this work the concentration of Ba, Ce, Co, Cr, Cs, Eu, Fe, Hf, K, La, Lu,
Rb, Na, Nd, Sb, Sc, Sm, Ta, Tb, Th, Yb, Zn and U in 161 samples of Marajoara pottery were determined using
INAA. The samples were obtained using a tungsten carbide drill and dried in an oven at 105o
C for 24 hours. The
samples and standards were irradiated in the swimming pool research reactor, IEA-R1 (IPEN-CNEN/SP), at a
thermal neutron flux of about 5 x 1012 n cm-2 s-1 for 8 hours. Two measurements series were carried out, after 7
days and 25-30 days. The results were studied by means of modified Mahalanobis filter and multivariate
statistical methods to verify the effect of the temper on the determination of trace elements. The results showed
that the temper effect in the pottery is negligible.
Como referenciar
MUNITA, CASIMIRO S.; TOYOTA, ROSIMEIRI G.; OLIVEIRA, PAULO T.M.; NEVES, EDUARDO G.; DEMARTINI, CRISTINA C. Tempering effect in ceramics chemical analysis by INAA. In: INTERNATIONAL CONFERENCE ON ART, 9th, May 25-30, 2008, Jerusalem, Israel. Proceedings... Disponível em: http://repositorio.ipen.br/handle/123456789/15998. Acesso em: 22 Mar 2025.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.