Effect of heat treatment on microstructure of commercial and vacuum sintered high speed steels AISI M2 and T15
Carregando...
Data
Data de publicação:
2003
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
É parte de
INTERNATIONAL LATIN-AMERICAN CONFERENCE ON POWDER TECHNOLOGY, 4th
Exportar
Resumo
The effect of quenching heat treatments on the microstructure of cast and worked
commercial steel AISI M2 and hot isostatically pressed as well as IPEN vacuum sintered AISI
T15 have been studied. The quenching treatments were carried out from 1160, 1185, 1210 and
1235°C. The average grain size, volume fraction and average size of the primary carbides
M6C and MC were determined by scanning electron microscopy and by using the digital
image analysis method "Quantikov". An increase in average austenite grain size with increase
in quenching temperature was observed for the AISI M2 commercial steel and vacuum
sintered specimens. In the case of the AISI T15 steel specimens, increase in quenching
temperature did not result in an increase in average grain size, both for the commercial and
the vacuum sintered steels. The average size and volume fraction of M6C and MC carbides
remained unaltered with increase in quenching temperature.
Como referenciar
NOGUEIRA, R.A.; RIBEIRO, O.C.S.; NEVES, M.D.M.; SALGADO, L.; AMBROZIO, F.F. Effect of heat treatment on microstructure of commercial and vacuum sintered high speed steels AISI M2 and T15. In: INTERNATIONAL LATIN-AMERICAN CONFERENCE ON POWDER TECHNOLOGY, 4th, Nov. 19-21, 2003, Guaruja, SP. Proceedings... DOI: 10.4028/www.scientific.net/MSF.498-499.186. Disponível em: http://repositorio.ipen.br/handle/123456789/15557. Acesso em: 13 Feb 2025.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.