Comparing spherical and irregularly shaped powders in laser powder bed fusion of Nb47Ti alloy
Carregando...
Data
2021
Data de publicação:
Autores IPEN
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
Journal of Materials Engineering and Performance
ODS
Exportar
Resumo
Literature reports that irregularly shaped powder has lower flowability and apparent density than spherical shaped powder, factors that hinder its use in additive manufacturing, although its cost is potentially lower. In this study, four samples of Nb47Ti alloy manufactured by laser powder bed fusion from plasma atomized (PA) and hydride–dehydride (HDH) powders with different scanning strategies and interstitial element content were compared. Laser power levels of 200 W and 300 W were investigated. To keep a constant powder mass under the laser beam, the processing table displacement for samples from the HDH powder was twice larger than the 30 µm used for samples from the PA powder procedure, due to the lower apparent density of the HDH powder. It was possible to achieve porosity levels below 1% with both powders. However, the power of 200 W generated 13% of porosity in the HDH samples. A similar microstructure formed by melt pools and cellular dendritic structure in a β phase matrix of body-centered cubic (BCC) structure was obtained in all samples. Furthermore, the low interstitial element content of samples from PA powder resulted in lower microhardness when compared to the higher interstitial element content of samples from HDH powder.
Como referenciar
GUZMAN, JHOAN; NOBRE, RAFAEL de M.; JUNIOR, RODRIGUES D.L.; MORAIS, WILLY A. de; NUNUES, ENZO R.; BAYERLEIN, D.L.; FALCAO, R.B.; SALLICA-LEVA, EDWIN; OLIVEIRA, HENRIQUE R.; CHASTINET, VICTOR L.; LANDGRAF, FERNANDO J.G. Comparing spherical and irregularly shaped powders in laser powder bed fusion of Nb47Ti alloy. Journal of Materials Engineering and Performance, v. 30, n. 9, p. 6557–6567, 2021. SI. DOI: 10.1007/s11665-021-05916-9. Disponível em: http://repositorio.ipen.br/handle/123456789/32634. Acesso em: 26 Apr 2024.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.