OLANDIR VERCINO CORREA
10 resultados
Resultados de Busca
Agora exibindo 1 - 10 de 10
Artigo IPEN-doc 30044 Avaliação eletroquímica da liga Ti6Al4V produzida por manufatura aditiva2023 - PIERETTI, E.F.; CORREA, O.V.; SILVA, L.C.E. da; PILLIS, M.F.; RIBEIRO, M.S.; ROSSI, W. de; NEVES, M.D.M.O aprimoramento de propriedades de superfície é uma exigência para osbiomateriais. O objetivo deste trabalho foi investigar a resistência à corrosãode amostras da liga Ti6Al4V produzidas por manufatura aditiva, em solução deRinger, que simula os fluidos corpóreos. As amostras foram produzidas alterando-se alguns parâmetros do processo. A resistência à corrosão foi avaliadautilizando-se métodos eletroquímicos como: monitoramento de potencial decircuito aberto, medições de espectroscopia de impedância eletroquímica epolarização cíclica e análises de superfície por MEV. Algumas amostras forammais susceptíveis à corrosão, pois a alternância de parâmetros do processo defabricação produz superfícies distintas com acabamento superficialdiversificado, resultando em comportamentos diversos.Artigo IPEN-doc 26761 Síntese de alumina anódica nanoporosa em liga de Alumínio AA 10502019 - OLIVEIRA, L.S.; CORREA, O.V.; BENTO, R.T.; PILLIS, M.F.Nos últimos anos, alumina anódica porosa tem atraído interesse devido ao arranjo regular dos nanoporos, à possibilidade de controle de seu diâmetro, e grande área de superfície específica. Neste trabalho foram obtidas estruturas de alumina anódica porosa por meio da anodização em duas etapas de uma liga de alumínio AA 1050 em eletrólito de H2SO4. As amostras foram anodizadas durante 4 e 8 h. A técnica de microscopia eletrônica de varredura com canhão de emissão de elétrons foi utilizada para a avaliação morfológica da superfície. Os nanoporos formados após 4h de anodização apresentaram distribuição homogênea na superfície da liga e diâmetro médio de 25 nm, enquanto que após 8h de anodização os nanoporos apresentaram-se com formato irregular e distribuição não homogênea.Artigo IPEN-doc 23608 Preparation and characterization of hydrotalcite coatings to protect aluminium alloys2016 - FERNANDES, S.M.C.; CORREA, O.V.; SOUZA, J.A.; ANTUNES, R.A.; LIMA, N.B. de; RAMANATHAN, L.V.Pitting corrosion of the aluminium alloy cladding of spent research reactor fuels during wet storage is the main form of degradation. To prevent this, hydrotalcite (HTC) based coatings were proposed. This paper presents the effect of chemical bath parameters on the microstructure of HTC coatings and the corrosion behavior of HTC coated AA 6061 specimens. The HTC coating formed at 98 °C from nitrate baths and referred to as HT-HTC was homogeneous and consisted of intersecting blade-like crystallites. Electrochemical tests revealed that HT-HTC coated specimens that were treated in a cerium salt solution were the most resistant to corrosion. Field tests in which un-coated and HTC coated AA 6061 alloy coupons as well as full-size plates were exposed to the IEA-R1 reactor’s spent fuel basin for 23 months corroborated the high corrosion resistance imparted by the HT-HTC + Ce coating. The mechanism by which the HTC coating and cerium protect the Al alloy is discussed.Artigo IPEN-doc 21601 Estudo do efeito de tratamentos térmicos sobre a resistência à corrosão da liga de alumínio 70752015 - FILGUEIRAS, DENISE R.; CORREA, OLANDIR V.; ANTUNES, RENATO A.Artigo IPEN-doc 20477 Effect of sol-gel preparation technique of mixed nanocrystalline rare earth oxide coatings on high temperature oxidation behavior of Fesup(2)0Cr5al alloy2014 - FERNANDES, S.M.C.; CORREA, O.V.; RAMANATHAN, L.V.Artigo IPEN-doc 20475 Effect of preparation technique on the extent of corrosion protection of aa 6061 alloy by hydrotalcite coatings2014 - FERNANDES, S.M.; CORREA, O.V.; SOUZA, J.A.; RAMANATHAN, L.V.; ANTUNES, R.A.; OLIVEIRA, M.C. deResumo IPEN-doc 19754 Nanostructured coatings to protect metallic materials at high temperatures2013 - FERNANDES, S.M.C.; PILLIS, M.F.; CUNHA, C.A.; CORREA, O.V.; RAMANATHAN, L.V.Artigo IPEN-doc 15881 Effect of mixed rare earth oxide coatings on high temperature oxidation of Fe-20Cr alloy2010 - FERNANDES, S.M.C.; CORREA, O.V.; RAMANATHAN, L.V.Artigo IPEN-doc 10517 Effect of coupon orientation on corrosion behavior of aluminium alloy coupons in the spent fuel storage section of the IEA-R1 research reactor2004 - CORREA, O.V.; LOBO, R.M.; FERNANDES, S.M.C.; MARCONDES, G.; RAMANATHAN, L.V.Artigo IPEN-doc 18404 Hydrotalcite coatings for increased aqueous corrosion resistance of aluminium alloys2012 - FERNANDES, S.M.C.; CORREA, O.V.; SOUZA, J.A. de; LIMA, N.B. de; SILVA, F.R.O.; RAMANATHAN, L.V.