SONIA REGINA HOMEM DE MELLO CASTANHO

SONIA REGINA HOMEM DE MELLO CASTANHO

(Fonte: Lattes)

ORCID

ScopusID

ResearcherID

Resumo

Graduada em Engenharia de Materiais (UFSCar, Universidade Federal de São Carlos), Mestre em Tecnologia Nuclear (IPEN/USP, Universidade de São Paulo) e Doutora em Ciências Químicas-Cerâmicos (UAM/ES -ICV/CSIC, Universidad Autónoma de Madrid, Espanha e Instituto de Ceramica y Vidrio/CSIC de Espanha). Ela é Pesquisadora Senior e atualmente Gestora Adjunta em Pesquisa e Desenvolvimento do Centro de Ciências e Tecnologia de Materiais (CCTM) do Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN-SP). É Professora da Universidade de São Paulo (USP), no programa de posgraduação Tecnologia Nuclear - Materiais. Coordenadora do grupo de pesquisas (GP/CNPq) em Materiais e Meio Ambiente. Principais áreas de atuação: - Energias Renováveis (células a combustível, catalizadores e biomassa), - Ambiental (mitigação, inertização e requalificação de efluentes e subprodutos de processos extrativistas e industriais, diretivas ambientais (RhOS, WEEE)), - Cerâmicas Biocompatíveis (vidros, compósitos multifuncionais para a implantologia). Experiência em gestão de Centro de Pesquisas, gestão ambiental, gestão de projetos, planejamento composicional de materiais, processamento coloidal, reologia, vidros e vitroceramicos, compósitos multifuncionais e nanoestruturas naturais. (Texto extraído do Currículo Lattes em 27 dez. 2021)

Página do item completo

Resultados de Busca

Agora exibindo 1 - 3 de 3

Low-temperature densification of ceramics and cermets by the intermediary stage activated sintering method
2018 - RESTIVO, THOMAZ A.G.; DURAZZO, MICHELANGELO; MELLO-CASTANHO, SONIA R.H. de; MOREIRA, ANA C.; GRACIANO, SERGIO; TELLES, VICTOR B.; TENORIO, JORGE A.S.
The article explores new concepts in order to promote ceramic and cermet materials sintering at lower temperatures between 1200 and 1300 C. The principle of the new process method called intermediary stage activated sintering (ISAS) involves the preparation of the ceramic powder with dispersed doping agents, such as nanotubes and fibers, which shape the pore structure at pressed pellets with stable interconnected thin cylinders between the grains. This feature resembles and extends the condition found during the intermediary stage sintering, which enhances the ions diffusion rate along tubular pores to increase shrinkage. Carbon nanotubes (CNT) and nanofibers are homogenized into cubic zirconia and alumina in amounts ranging from 1 to 10 vol% at high-energy milling devices and ultrasound disruptor under ethanol media. Ni, Cu and Mo/MoO3 can be also added to provide tubular channel filling. Sintering of uniaxially pressed pellets is carried out in a dilatometer and tubular furnaces at 1200/1300 C under air, argon and controlled oxygen partial pressure atmospheres. TG/DTA/MS analyses of sample pellets reveal the oxidation and gas release temperature and duration. The results demonstrate the ISAS process concept is valid since it further increases the ceramic final density by 8% of the theoretical density at 1200 C, leading to close the porosity at 1300 C, compared to 1500–1600 C temperatures at conventional process. Short CNT and cellulose nanofiber were found to be the best additives in this sense.
Processing, microstructure and thermoluminescence response of biomorphic yttrium oxide ceramics
2016 - SANTOS, S.C.; YAMAGATA, C.; CAMPOS, L.L.; MELLO-CASTANHO, S.R.H.
The present work reports a fast-direct bio-prototyping process using Luffa Cylindrica vegetable sponge to produce biomorphic yttrium oxide ceramics with reticulated-porous architecture and thermoluminescence response. Processing parameters as rheology of yttrium oxide suspensions, bio-template surface treatment and thermal decomposition of bio-template were investigated. Shear thinning suspensions of 30 vol% yttrium oxide with apparent viscosity of 243mPa.s provided a successful impregnation of samples, whereby bio-templates with smooth ceramic layer and hierarchical reticulated architecture were formed. By thermal treatment at 1600 degrees C for 2 h biomorphic yttrium oxide ceramics with porous microstructure and TL response at 150 degrees C and lambda=550 nm were produced. The proposed fast direct bio-prototyping process is suitable for the production of ceramic components with complex shape and demonstrates potential for general applicability to any bio-template. (C) 2016 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
Fabrication of Sr- and Co-doped lanthanum chromite interconnectors for SOFC
2011 - SETZ, L.F.G.; SANTACRUZ, I.; COLOMER, M.T.; MELLO CASTANHO, S.R.H.; MORENO, R.